Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Good Hope Hardwoods - Walnut Slabs & Specialty Hardwood Lumber

Color Wood - With Wood?

Posts

Color Wood - With Wood?

#1

Color Wood - With Wood?

charlie belden

>In a conversation with a woodturning club member about hollowing and captured hollowing systems, the subject of green turned cowboy hats - with head bands came up.

Now I'd thought the headband was turned dry, in another wood, and slipped over the top of the hat. I learned that the head band was turned right into the hat - and colored - by rubbing it, on the lathe, with a colored wood - like rosewood.

Now I've been saving shavings and scrapings from colored woods, - padouk, blackwood, ebony, mahogany, yellow heart, purple heart, etc. , with the idea of doing a Tongue In Cheek piece about pieces that "ultize the presence of absence" (see ArtSpeak Thesarus for substitutes for "holes"). The idea is to place small neat piles of different colors of chips and dust on a flat, turned round. "plate" and title it "The Missing Presence For The Presence of Abscence" .

But what If - I melted some carnuba, stirred in some padouk "dust" - and made a crayon? Could that work sort of like the oily rosewood? This could be another take on The Presence of Abscsence since the padouk is barely actually present on the finished piece.

Spinners and weavers have been using natural dyes - walnut shells and bark. And turners are coloring areas of pieces - with all sorts of stuff. Wouldn't it be more "organic", more "natural" to use actual wood to add color - to wood?

Just wondering.

Re: Color Wood - With Wood?

#2

Re: Color Wood - With Wood?

Greg Haugen

>I was suprised as well when I found out how the "bands" were colored. Along that same technique I recently saw a turner who made spinning tops. Instead of using brush markers to highlight the chatter they used thin sliced pieces of other species. They also would use a tool, say a spidle gouge, dramaticly out of position to a create a much broader chatter pattern and then used the same technique to highlight. They were very nice looking and had a wonderful "organic" look to them.

Greg H.

Re: Color Wood - With Wood?

#3

Re: Color Wood - With Wood?

John K Jordan

>Abscence, Abscsence? Not at all trying to be critical, but since you spelled this two different ways in your message, one hopes that if the word ends up engraved on something it will be the word you intended. Perhaps you mean 'absence'.

I speak from experience. Without spell checkers, I'm doomed. I once misspelled the word 'millennium' on a video title to be shown to a delegation from Washington. Although at least 10 people had reviewed and missed it, fortunately an audio engineer in Atlanta caught the misspelling in time. The observant gentleman pointed out that instead of meaning "a period of 1000 years", the word as spelled could be interpreted as meaning "a 1000 anuses".

JKJ, Worlds Worse Speller

Re: Color Wood - With Wood?

#4

Re: Color Wood - With Wood?

charlie belden

>I'm so absinthe minded. Could be that my drinking has something to do with it ; )

Celebrate!? I thought you said "celibate"! DAMN!

The english language, especially the American version, has borrowed so many words from so many languages - and then often mispronounced the original word - it's a wonder we can communicate at all. And anyone who has played with PhotoShop much knows that even photographs can't be trusted either - a picture possibly being a thousand mispronounced or misspelled words.

But back to the idea of colored wood's sawdust "crayons". Anyone tried this idea yet? If so, how'd it work?

Re: Color Wood - With Wood?

#5

Re: Color Wood - With Wood?

Ralph

>Madrone burl (green) should always be boiled. When we do that we get a red colored "soup". One of the locals tried boiling some Maple in the soup.

It took the color, but only "boiled" in about a 1/4 inch.