Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Compare cordless drills on the numbers that matter

Threaded Lids - Cheating?

Posts

Threaded Lids - Cheating?

#1

Threaded Lids - Cheating?

charlie belden

>There's been a recent run on thread chasing and jigs for cutting threads recently.

I'm sure the Purists will balk at this idea - but if the object is to thread to parts together - ready made, turnable, parts are availabe - at your local hardware or plumbing supplies store.

Head to the aisle with the plastic pipes - white PVC for smaller sizes, black ABS for larger sizes. Cut off or turn off what you don't need, make a hole in each part for the PVC or ABS to fit in - DONE. Unless the two parts are separated you don't see them anyway - and ABS looks a lot like ebony or blackwood and white PVC - don't say ivory - we're running out of elephants as it is.

BTW - I picked this idea up from a fellow turning club member - so any pats on the back or verbal abuse will be passed along to HIM.

Re: Threaded Lids - Cheating?

#2

Re: Threaded Lids - Cheating?

bill Crommett

>Anyone who will not share verbal abuse id NO FRIEND !

Re: Threaded Lids - Cheating?

#3

Re: Threaded Lids - Cheating?

Wally Dickerman in Arizona

>Plastic threads from the plumbing dep't of Ace is fine for an urn that will eventually be sealed shut is okay. If you're threading an art form piece then it isn't IMHO.

Wally

Re: Threaded Lids - Cheating?

#4

Re: Threaded Lids - Cheating?

Hugh Widdup

>I used the abs fittings for an urn and still had compliments

I would not use it on something that would be opened a lot.

But what about nice brass threads??

Re: Threaded Lids - Cheating?

#5

Re: Threaded Lids - Cheating?

john lucas

>I believe you can get brass threaded inserts from Craft Supplies if I'm correct. I had friend who was building an Urn and needed such an item. I looked it up and sent him the URL. I did however look in a bunch of places so I might be telling you wrong. They do exist.

If you want to make your own you can get brass pipe parts and cut them down on the lathe using woodturning tools. I used an end cap and the threaded portion of a brass pipe nipple.

Re: Threaded Lids - Cheating?

#6

Steven Antonucci

Yeaaa....... nah! Not for me...

steve antonucci

>Easy, yes. Looks good, mebbe...ok, probably wouldn't float my boat...

If I wanted the easy way out, I could probably just get a plastic container at WalMart. Cutting threads is not that difficult (nor that easy!) that I'd be looking for a workaround. If I didn't like the look of the threads, I can always turn them off and make a press fit...

Sorry Charlie, not with you on this one.

Steve

Re: Threaded Lids - Cheating?

#7

I'm with Wally on this

Steven Kubien

>

Re: Threaded Lids - Cheating?

#9

Re: it was in Packards catalog

DavidWalser

>CSUSA used to carry this product. Glad to see it's available elsewhere now that CSUSA has dropped it.

Re: Threaded Lids - Cheating?

#10

Denis Putland

Re: it was in Packards catalog

Denis Putland

>Metal moves with heat changes and wood moves with moisture changes.

It would be interesting to hear from some one with experience with this product.

Denis

Re: Threaded Lids - Cheating?

#11

Re: it was in Packards catalog

john lucas

>You won't get much wood movement in an inch and a half. I have not used these but have glued metal, glass and other non moveable materials to wood. I use flexible glues like clear silicone caulk or Elmers f26. You don't have much wood movement in a house if the wood was dry when you inserted the piece. I make theaded boxes to tolerances of about .015" ( I know it silly in wood but I do it anyway). The only problems I've had with wood movement is the lid not screwing down to the same position all the time. The threads don't seem to get tighter but apparently the wood swells where the shoulders are and causes misalignment.

I'm not saying the wood doesn't move. I would not make the metal rings super snug. Make it so they drop in and use 5 minute epoxy which has some flex and you'll be OK. If I was in doubt about the wood movement I would use the other 2 adhesives.

I make hand mirrors from 2" to 4". Glass doesn't move and I had a 4" mirror break on me due to wood movement. On the smaller mirrors wood movement is not a problem as long as there is a tiny gap. On my 4" mirrors I leave at least 1/1/6" or 3/32 gap all the way around. That solved all my wood movement problems on that size.

Re: Threaded Lids - Cheating?

#12

Re: Threaded Lids - Cheating?

Gary Evans Tallassee, TN

>At one time, Mike Hare, VM Woodworking, and a friend of his were producing matching threaded plugs and rings out of various woods that could be turned to mate up with your project. I know they sold them at the regional symposiums.

I've watched a lot of demo's on making threads, but it's not a skill that I have an interest in taking the time to learn. I bought a set out of walnut to use when I turn the urn for Cole's ashes.

Gary