Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

ADVERTISE HERE - FREE TRIAL

Adding a Power Feed To a Wood Lathe

Posts

Adding a Power Feed To a Wood Lathe

#1

Adding a Power Feed To a Wood Lathe

Woodie49

>Anyone know where I can find information or ideas on adding a poewr feed to a wood lathe?

Thanks

Re: Adding a Power Feed To a Wood Lathe

#2

Re: Adding a Power Feed To a Wood Lathe

Dennis Yoder

>What kind of power feed are you talking about?

Re: Adding a Power Feed To a Wood Lathe

#3

Re: Adding a Power Feed To a Wood Lathe

Woodie49

>Long ways. Like on a Metal Lathe

Re: Adding a Power Feed To a Wood Lathe

#4

Re: Adding a Power Feed To a Wood Lathe

Dennis Yoder

>Not to be a wise ass but it would be easier to find an old used metal lathe that you could modify to turn wood.Dennis Y

Re: Adding a Power Feed To a Wood Lathe

#5

Re: Adding a Power Feed To a Wood Lathe

john lucas

>I agree with Dennis. I've seen several metal lathes converted to wood. Wood lathe beds are not designed to accurately have a sliding tool rest so even if you rig up a drive for the tool it might not slide smoothly enough or accurately enough. A metal lathe on the other hand only needs a tool rest. I rigged up my Smithy for hand turning when I glass artist needed aluminum pieces for his art. We would rough out the metal using the metal lathe feeds and tooling. Then I would switch out the tool post to a bar and use it with wood turning tools to make the graceful curves that would be possible only with CNC on a metal lathe.

Re: Adding a Power Feed To a Wood Lathe

#6

Re: Adding a Power Feed To a Wood Lathe

Chuck Engstrom

>Hi Woodie - The German company Hapfo makes lathes with a motorized carriage for the tool rest and duplicator cutters. Here's a photo of one at work last week at Bruce Post Co., Mr Bruce himself at the controls, cutting a 30" taper for a cane blank for the Eagle cane project, canes for wounded veterans. I saw another one last weekend when our club visited Mark Supik Co in Baltimore, where Joe Supik gave us a quick demo of another Hapfo turning out a beer tap handle, one of their specialties.

I hope this is the sort of thing you're looking to find out about. If you google Hapfo you'll find more info.

Best--

Chuck


img

Re: Adding a Power Feed To a Wood Lathe

#7

Re: Adding a Power Feed To a Wood Lathe *LINK*

Dick Coers

>You might look at a Vega duplicator. They use a roller chain to move the cutter from end to end. Replace the manual handle with a reverseable gear reduction motor.


vega

Re: Adding a Power Feed To a Wood Lathe

#8

That's a Really Cool Lathe

Jorge Castaneda ~ Downeast Maine

>Thank for posting it Chuck.

Jorge