Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Want Better Milling & Firewood Knowledge?

Woodfast M408

Posts

Woodfast M408

#1

Woodfast M408

Bill Tucker

>Any information or opinions on the Woodfast M408, 220v, 20" swing lathe would be appreciated. Apparently this lathe has not been available for some time, so web info is scarce, or more likely, I just don't know where to look. Any estimate of potential worth would also be appreciated.

thanks,

bill

Re: Woodfast M408

#2

Re: Woodfast M408

John K Jordan

>Bill,

Gary Evans had a 20" WoodFast for sale on the Classified section a while back. You might contact him to see what he knows. He found some pricing information somewhere.

JKJ

Re: Woodfast M408

#3

Re: Woodfast M408

Bill Tucker

>Thanks John - that helps

bill

Re: Woodfast M408

#4

Re: Woodfast M408

Bill Tucker

>By the way - just got my copy of American Woodturner - CONGRATULATIONS!!

Re: Woodfast M408

#5

Re: Woodfast M408

Sean Troy

>I know the 16" swing was a great lathe and I'm sure there are plenty of them still in operation. I think they were the M404. The Arizona Woodturners have been using that one at demos and club meetings for at least the last 16 years. Takes a beating and keeps on ticking.

Re: Woodfast M408

#6

Re:My Woodfast M408 is a 16" swing.....

Jamie D

>....and I still love it after about 15 yrs. ownership/use. Mine is a 110v 1 HP DC VS and when I was wanting more power I decided to buy Studly as the new "brute" for the shop.

Re: Woodfast M408

#7

American Woodturner?

John K Jordan

>>By the way - just got my copy of American Woodturner - CONGRATULATIONS!!

I'm not expecting to see any of my turning in a magazine anytime soon (if ever), so I'm clueless as to what you mean. If it's something intended for the other John Jordan I'm sure he'll appreciate it. Very friendly guy (and talented too!)

JKJ in East TN

Re: Woodfast M408

#8

Re: American Woodturner?

Barbara Gill, Remlik VA

>John, I think the only way you will keep things straight is to put a clarification after your name. :-)

Re: Woodfast M408

#9

Re: American Woodturner?

John K Jordan

>He could sign "John B Jordan, Professional Woodturning Wizard" and I'll use "John K Jordan, Goat Farmer and Part-time Amateur Turner". (BTW, We've got our first baby goats on the way - I felt some little goat feet kick a few days ago!)

JKJ

Re: Woodfast M408

#10

Re: Woodfast M408

John Peck

>Woodfast lathes were sold in the US by Craft Supplies. The 2003 Craft Supplies catalog shows 2 models, the 408 which had a 16-inch swing and the 410, which had a 20-inch swing. Each model came in a short-bed version (16 inches between centers, models 408 and 410) and a long bed version (39 inches between centers,models 908 and 910). The 2004 Woodcraft catalog was the last to show Woodfast lathes and only showed the 20-inch swing version (M410, shortbed version and M910, long-bed version). Description in 2003 catalog: swing over bed: 16 inches standard, 20 inches available; Spindle speeds: 5 speed model, 370, 650, 1200, 2000, 2700 rpm; variable speed model 0-2750; spindle thread size: 1-1/4 x 8 tpi inboard, 1-1/4 x 8 tpi L.H. outboard; head and tailstock taper: No. 2 MT; height: center spindle to floor: 45 inches on 16 inch model, 47 inches on 20 inch models; indexing: equal spaces 24, 12, 8, 6,4,3, 2; weight, net: M408-385 lbs, M908-520 lbs. I have a PDF copy of the somewhat "crude" manual for the lathe, which I'll e-mail to you.

Re: Woodfast M408

#11

Re: American Woodturner?

John Jordan

>:) You're not holding on to any of my checks are you?

Where's that tape you were gonna send me?

John

Re: Woodfast M408

#12

Re: American Woodturner?

John K Jordan

>>tape...

Dang, sorry. Got real busy with the tractor and forgot all about it, dirt, gravel, trees.

Cleared a corner of the property to set a hay storage building and had to fill at least 6' on a hillside. While cutting a flat spot, I couldn't budge a couple of rocks that stuck up a few inches. A few hours with the backhoe and I dug out some huge rocks, 2-3 tons each the best I can figure. I buried them in the fill, but now I have to figure out what to do with a 2000 lb black cherry stump! Like the rocks, it's way too heavy to do anything but push around. Maybe drill some holes and fill with black powder?

I'll make sure to dub a tape in the next day or two. I think I still have the original in digital on my video editor.

JKJ

Re: Woodfast M408

#13

Re: American Woodturner?

John Jordan

>Put it on DVD, then. I don't want the stump.

John

Re: Woodfast M408

#14

Re: Woodfast M408

Michael Wilkins

>Check with Craft Supplies in Utah. I have a M410 that was purchased without an owners' manual. They sent me one @no charge. Great folks.

They were the sole US retailer for these lathes, but no longer sell them. Great lathe and built like a tank.