Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Personalized Wooden Watches, Engraved Free

Madrone Box

Posts

Madrone Box

#1

Dick Hines

Madrone Box

Dick Hines

>This is my first time turning madrone. it wouldn't be my last. The box is 2 3/4" X 2 3/4". The bar on the top is a piece of #6 copper ground wire. I heated it to turn the color.


img

Re: Madrone Box

#2

Re: Madrone Box

Randy G

>Very nice. I like the design. Good work

Re: Madrone Box

#3

Brad Vietje

Way Cool, Dick !

Brad Vietje

>Dick,

I like the design and the creative use of copper wire. That gives me an inspiration or three... since I'm in the solar biz, I see a fair amount of "bare-6" ground wire, and you just got my creativity going...

Maybe creativity can't be learned, but it can be stimulated.

Safe spinning,

Brad Vietje

Newbury, VT

Re: Madrone Box

#4

Re: Madrone Box

Dick Coers

>Very beautiful Dick. Are the coils, holding the handle, also copper wire? Care to give me a hint how you fastened to the lid? Ah, after those questions, would you mind if I try that myself one day? I might also try to let the copper go green for use with lighter woods, and maybe just a smidge further off the lid. I just love it!

Re: Madrone Box

#5

Dick Hines

Re: Madrone Box

Dick Hines

>The beads that are holding the handle are turned from blackwood. They are attached to the top with two small rods turned out of blackwood that is glued into holes in the beads and the top.

Take the idea and run. But I will tell you something. If you don't have a couple of hours to blow you will never get it done. I lost 3 sets of the beads in the chip pile. And a couple of the rods ar also in there.

I have time to play with this kind of pieces now so there may be more on the way.

Re: Madrone Box

#6

Re: Madrone Box

Cyril Griesbach

>Wow is that nice, Dick. I recall you mentioning it on last night's chat. I wish the photo was larger so I could see it even better.

Re: Madrone Box

#7

Here you go Cyril

Carole Valentine

>I had re-sized the photo for Dick for another forum.


img

Re: Madrone Box

#8

Re: Here you go Cyril

Lan Brady

>thanks Carole,

Dick, this is really cool!

I am glad you have more time

Lan

Re: Madrone Box

#9

Re: Madrone Box

Jim Shaver - Oakville, Ont

>Totally Beautiful !

I have turned Madrone before as well and thought it was very much as you have found it, a delight to the eye and to the touch.

Love lidded boxes, I have a small collection, your's is wonderful!

Take care,

Jim

Re: Madrone Box

#10

Thanks, Carole

Cyril Griesbach

>

Re: Madrone Box

#11

Re: Madrone Box

Robert Lalonde

>Hi Dick. I agree with you about the madrone. There is a lot of it up here in northwestern California that we can harvest from BLM and forest service land with inexpensive firewood permits. If you can get some green stuff, it is a dream to turn. Bob.

Re: Madrone Box

#12

Re: Madrone Box

Jennifer@Indy.USA

>Dick this is a lovely box! I'm glad I didn't miss it. It was pretty far down the page.

Jennifer