>This is a piece of Mahogany. I get lots of it free from a friend that works in door manufacturing. I don't like it much but it's free. I've got to keep working at this since Jamie came and taught us. All comments welcome.
>Nice job, Cyril. I especially like the rounded corners, which add interest for me. I like turning Mohagany, but rarely do. I'd love to see what you do with a wood you like!
>I had a buddy in the door business, too, so I got plenty of 10" wide african mahogany, maple and white oak 8/4 end cuts. He didn't own it when I was into the flat stuff when I could really use it for table legs. Now he doesn't own it so I occassionally go dumpster-diving to get some cutoffs for sacrificial tenons. I keep thinking I'll do some segmented work with it but I'm not crazy enough to cut a board into little pieces just to glue it back together again. At least not yet. Guess I'll give you bowl a try. Thanks for the post.
>... to encourage using the square blank corners that most toss away after using the bandsaw! Don't forget that you paid good money for those corners, so consider using them as "design opportunities."
>...any bloodstains so you have the technique down. This is a good use of flat scraps too shallow for bowls, and adds interesting shape variety to your inventory.
>Thank you all for your comments and encouragement. This is a fun exercise and you can "amaze your friends and family". :) If you ever get the opportunity to learn from Jamie Donaldson don't pass it up.