captured bar system for mini lathe.
john lucas
>OK maybe this is too small for captured bar hollowing but it was certainly fun to build. That's a Dremel lathe and I'm hollowing a Tagua nut with a light to judge thickness.
Knowledge You Can Build On — Est. 1998
captured bar system for mini lathe.
john lucas
>OK maybe this is too small for captured bar hollowing but it was certainly fun to build. That's a Dremel lathe and I'm hollowing a Tagua nut with a light to judge thickness.
Re: captured bar system for mini lathe.
Donna Banfield
>What's the swing on that thing? 1/4 inch? ;^)
Very Nicely Done!
Greg Haugen
>
Re: captured bar system for mini lathe.
Pete in Holland, MI
>I used to have one of those lathes as a kid back in the mid-late 70's. Had a lot of fun with it, not having a clue how to use a lathe. One speed fits all.
Is this an old lathe, or are they still in production? All plastic, if I recall.
Pete
Re: captured bar system for mini lathe.
john lucas
>Pete I guess it's quite old. I picked it up at the flea mkt a few years ago.
Pretty cool !
Don Orr
>That's neat John. I think you must be a "little" "nuts" ;-)) I wish I had a small fraction of your ingenuity.
Re: captured bar system for mini lathe.
paul waddle
>You out did yourself John-great work and light thickness guage too... pw
Re: captured bar system for mini lathe. *LINK*
GalenV in Iowa
>Pete
One in your area on ebay.
If John has not got a patent on his rig yet you could build your own too.
From the tremendous torque this unit must be able to produce John must have thought the capture tool was safer than just a hand grip!
:>)
Galen
http://cgi.ebay.com/Dremel-Moto-Lathe-Model-700-for-Small-Wood_W0QQitemZ260366917643QQcmdZViewItemQQptZLH_DefaultDomain_0?hash=item260366917643&_trksid=p3286.c0.m14&_trkparms=72%3A1205%7C66%3A2%7C65%3A12%7C39%3A1%7C240%3A1318%7C301%3A1%7C293%3A1%7C29
How do you sharpen a light, John?
Mike Stafford
>Sorry....you said you were hollowing a tagua nut with a light...
That is a cool looking little rig. Nice work...
Re: captured bar system for mini lathe.
Dick Hines
>John, you way to much time on your hands.
Good job though.
Re: captured bar system for mini lathe.
Pete in Holland, MI
>Too much time on his hands? Shouldn't that be said about all turners ? : )
dremel should market it
robert davis
>
Re: captured bar system for mini lathe.
paul waddle
>What size bolt do you use for the interchangeable cutting tips... ha ha. Would an elbo system work here?? pw
Cute!
Brad Vietje
>Hey John,
That looks like a cool little tool.
I won't be all that surprised when you post the world's first hollow form made from a grain of rice!
Safe spinning,
Brad Vietje
Newbury, VT
Maybe in the spring :)
john lucas
>