New lathe choice
Marc Phillips
>Hi all.... been gone awhile, but after surgery and a move and a job change I have a shop again and started turning again... sure feels good!
Anyway, I have been turning on the Jet 1236 for about 3 years, and due to a decent tax refund I am considering getting a larger and better lathe...
I have been looking and reading and comparing, and, unless you have a better suggestion (I am all ears) I have so far narrowed it down to the Jet 2hp 16" or the DVR... both are around $2100 or so...
I can't picture outboard turning on the Jet with the headstock slid down to the other end.... is there an outboard attachment?
..... and I would like to have reversible capability to help with the sanding chores... and I don't think the Jet has that... and I have never turned on a lathe with this capability so I don't even know how valuable this is... or isn't :)
I am a little leery of the DVR due to being uncomfortable with electronics in a wood shop... and if it breaks the whole headstock goes back to the repairman?
I would sure appreciate your input on this... I have wanted a larger lathe for years and this will be the only chance I have to get one...
Thanks...



