Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Veritas - Innovation in Tools

Wood ID Needed

Posts

Wood ID Needed

#1

Wood ID Needed

Ken Oakley-Sunny St. Cloud, Fla.

>This morning while cruising around town I came upon a pile of logs, branches and twigs. I jammed on the brakes, got out of the truck and the homeowner came out and I asked him if I could take some of the bigger pieces, He said OK. He told me it was cedar but I knew it wasn't. This is more a shrub then a tree and it is a popular landscaping item here in Central Florida. This one had to be gigantic because one log I got is 22" in Diameter by 30" long. Took both of us to pick it up onto the tailgate. I am sending pics, so anybody who has an idea what it is please respond.


img

Re: Wood ID Needed

#2

Re: Wood ID Needed-Pic-2 

Ken Oakley-Sunny St. Cloud, Fla.

>


img

Re: Wood ID Needed

#3

Re: Wood ID Needed-Pic-3 

Ken Oakley-Sunny St. Cloud, Fla.

>


img

Re: Wood ID Needed

#4

Re: Wood ID Needed-Pic- 

Ken Oakley-Sunny St. Cloud, Fla.

>


img

Re: Wood ID Needed

#5

Re: Wood ID Needed

Tom Henderson, Gulf Breeze FL

>I believe that is Japanese Yew, also called podocarpus. I was recently given a log of it about 15 inches in diameter. Apparently it will grow fairly large if left alone. Mostly I have seen it in hedges. My parents house in Ormond Beach had such a hedge.

It is a wonderful turning wood, very stable and beautiful when finished. You will enjoy working with this wood.

Re: Wood ID Needed

#6

Re: Wood ID Needed

Ken Oakley-Sunny St. Cloud, Fla.

>Thanks Tom. I think you nailed it. I have 4 of the shrubs on my property but they are only 10' high. You are right about the grain and color. I have cut some into pen blanks size and am fuming them with ammonia and "WOW" beautiful wood. Get ready Ebay---

Re: Wood ID Needed

#7

Re: Wood ID Needed

Al Neighbors

>Nice haul, Ken.

Why the fuming? Just curious.

And how do you do it??

Re: Wood ID Needed

#8

Re: Wood ID Needed

Ken Oakley-Sunny St. Cloud, Fla.

>Back last spring I picked up a batch of Sycamore and quarter sawed a piece and posted a picture of the snakeskin pattern in the piece. Steve Antonucci posted a reply stating if I didn't fume the wood with ammonia the pattern would fade. So I did and it sure made the pattern more pronounced and it faded very little if any. I now fume just about any wet wood prior to drying. Of course almost all the wood I cut is to pen blank size to be sold on Ebay, It may be my imagination but I think the fuming also helps reduce cracking in drying.

The way I do it is to put a 2 gal. bucket into a 5 gal. bucket. Put the blanks into the 2 gal. bucket, pour about 2" of ammonia into the bottom of the 5 gal bucket. Cover tightly. Usually 18-24 hours is all the time needed. I remove the blanks, seal the ends with Deft Sandinig sealer, lay the blanks on a drying rack and in 7-10 they are ready to be listed on Ebay.

Re: Wood ID Needed

#9

Re: Wood ID Needed-Fuming

Ken Oakley-Sunny St. Cloud, Fla.

>Here is the way I do it


img

Re: Wood ID Needed

#10

Re: Wood ID Needed-Fuming

Stuart Johnson

>Ken, I thought fuming was just a surface treatment. Have you dried and then turned any of the pieces to be certain the fuming goes through the item. You might have some upset customers if it turns off when they round the blank.

Re: Wood ID Needed

#11

Re: Wood ID Needed-Fuming

Ken Oakley-Sunny St. Cloud, Fla.

>I don't turn any more but do mention the fuming in my listings. Haven't had a single complaint since I started fuming.