Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Find a woodworking club near you

Saw Truing

Posts

Saw Truing

#1

Saw Truing

Jarrad

>I have a table saw and a 10" miter saw. I have a real issue getting a true 45 degree on either. What is or is there a way to true these saws.

Thanks for any help.

Re: Saw Truing

#2

Re: Saw Truing *LINK*

Ian

>jarrad,

you don't saw what saw your trying to calibrate, and I will admit that some of the lower end budget saws are almost impossible. here is a good place to start.

http://www.woodmagazine.com/wood/searchResults.jsp?cx=016626316691903667242%3Aojmw2aukwji&cof=FORID%3A10&q=table+saw+tuneup#1333

as for the miter sled, if its not a high end saw or an aftermarket sled, you will always get errors, unless you lock it and don't move it.

IAN


wood mag table saw calibration