Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Super Resolution Thermal Imaging Camera

turning green cherry

Posts

turning green cherry

#1

turning green cherry

John K Jordan

>I can't remember ever turning green (black) cherry - all I've had has been dry. Today I had to take down a cherry tree that's probably 24" or so at the base. I'm planning to saw it into lumber (for shop flooring) and cut some up into spindle blanks, but thought I might turn a chunk or two green.

How soon does cherry need to be rough turned? Someone told me once to turn it as soon as possible, but does this mean by tomorrow or within a few weeks, or what? I'll anchorseal the end grain.

JKJ

Re: turning green cherry

#2

Steven Antonucci

Sooner is better than later

steve antonucci

>I would process the wood to remove the pith at a minimum, and even rough out a few blanks just to be sure. Anything that you cut needs to be sealed.

If you cut it longer, you can cut the cracks out later...

Steve

Re: turning green cherry

#3

Re: turning green cherry

john lucas

>John Since I just turned a bunch of it I have some opinions. By turn it soon we mean, soon. Or seal it or put it in plastic bags. I find cherry starts checking on the endgrain really quickly. Other than that it works about like most green fruitwoods. It moves less than apple but does move. It rusts your lathe about as bad as any wood I've turned so protect the bed.

Re: turning green cherry

#4

Re: turning green cherry

Carole Valentine

>I just get rid of the pith and ALL sapwood and bark, anchorseal it all over and have had no problem at all with it. Cracks will start in the sapwood and pith and knots very quickly, and bugs just LOVE the tender layers under the bark.

Re: turning green cherry

#5

Re: turning green cherry

Bill Neddow------WebKitFormBoundary+w+uCg3oRve3I+f

>I agree with Carole. Cherry is wonderful to work with when green. Like Big Leaf Maple, it makes even a beginner feel like a real master turner with the lovely ribbons of shavings that go all the way to the ceiling. Smells good, too. Just keep the walls a consistent thickness, an relatively thin, and you should have no trouble with cracking.

Re: turning green cherry

#6

Re: turning green cherry

Dick Coers

>and make sure you clean up after turning. Wet cherry will rust steel before your eyes!

Re: turning green cherry

#7

Re: turning green cherry

Roger

>John,

Go to www.fredwilliamson.com. Check out his round and natural edge bowls. They are all turned green, with and without sap wood. He turns them thin so they don't crack. Good luck.

Roger

Re: turning green cherry

#8

sapwood

Adrien

>I rather like the sapwood together with heartwood. The contrast can be very appealing.

Re: turning green cherry

#9

Dick Hines

Re: turning green cherry

Dick Hines

>John this is a baby cherry tree. The last cherry I got had limbs that big. It was 5' across the stump.

Re: turning green cherry

#10

Dick Hines

Re: turning green cherry

Dick Hines

>You will also be amased at the size of Fred's bowls. Some of them are as large a wash tubs.

Re: turning green cherry

#11

Re: turning green cherry

John K Jordan

>>5' across the stump.

Yikes, I've never seen one that big.

JKJ

Re: turning green cherry

#12

"Really soon" equals .........

Pete in Holland, MI

>You will notice the cherry blanks starting to check within a few hours of cutting into lengths. Keep it wet. Process into chain-sawn blanks as soon as possible and end seal immediately, then still keep them out of the wind/sun/dry house till you plan to turn them.

I picked up about 20 pieces of cherry a few years ago ranging from 12 to 18" diameter. Was cut in the early spring of the year. Put them in my truck on a Sunday. Went to pull them out the following Monday night and all had checked too much to turn.

Re: turning green cherry

#13

Re: "Really soon" equals .........

john lucas

>I cut a bunch of cherry and drove 20 miles to the house. The ends were already checking in that short period of time.

Re: turning green cherry

#14

Re: "Really soon" equals .........

Carole Valentine

>Pete, early spring is just about the worst time there is to harvest wood, especially fruit woods. The sap is running high and the wood will check/split/warp much more than if it is harvested in early or mid winter when the sap is down.

Re: turning green cherry

#15

Dick Hines

Re: turning green cherry

Dick Hines

>It was the bigest cherry I ever saw. And it was not hollow. I got some of the limbs and they were up 18"-20". A couple of guys are trying to figure how to get to a mill to have it cut into planks.

Re: turning green cherry

#16

Re: turning green cherry

John K Jordan

>For that size you can take the mill to the log. A portable swing mill (circular saw blade) like a Lucas can cut dimensioned lumber and beams but a slabbing attachment can cut a slab over 6' wide. This type of mill runs on a frame which can be set up around the log, wherever it lays.

JKJ

Re: turning green cherry

#17

Re: "Really soon" equals .........

John K Jordan

>Thanks. I painted the ends of the chunks and the logs I'll saw with anchorseal soon after cutting. It was interesting to watch the water run, not drip, out of the chunks when I picked them up with the tractor. A couple of days later, even those unsealed pieces intended for the firewood pile have no signs of checking so maybe this is one of those tough trees. With this weather I have no time to turn so I'll try to give away as much as possible.

JKJ