Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This $39 jig will make you a WOODWORKING GOD!

Desert Woodturning Roundup 2009 review (very long)

Posts

Desert Woodturning Roundup 2009 review (very long)

#1

Desert Woodturning Roundup 2009 review (very long)

Jason Clark

>The 2009 Desert Woodturning Roundup was this weekend and I thought I'd be one of the first to post my review. Up front I want to declare that I was on the organizing committee for this symposium so my experience may have been a little different than most attendees.

Friday started around 9AM and ran until 8PM. Most of the day was spent photographing the pieces in the Instant Gallery, browsing the vendors area, and meeting as many people as possible. Around 6PM my attention shifted to the Pen turning demos. The 55 chairs that had been setup were quickly filled and it ended up being standing room only with 80-90 people in the room at any given point. I took a couple of photos but was having some trouble with my flash. Overall I think it was a huge success, but next time we need to arrange for a video camera and a projector to be setup. Doing a demo with small pen parts in a large room with a capacity crown is nearly impossible without video help. My wife and I left after the 2nd demo, around 8PM, as we knew we had an early morning on Saturday.

Saturday started at 8AM with the opening ceremonies, Bill Haskell (President, American Assoc. of Woodturners) spoke as did each of the demonstrators. I didn't stay for the whole 90 minutes as I had more instant gallery pieces to photograph.

The first rotation started at 9:45. I had planned to attend Cindy Drozda's "Multi-Axis Hollow Form" but instead decided to forego the first rotation and elected to roam from room to room photographing all of the demonstrators in action. This included all 9 demonstrators, Jimmy Clewes, Bonnie Klein, Cindy Drozda, Mark St. Leger, Alan Lacer, Nick Cook, Keith Tompkins, Hans Finsterwalder, and Dwight Klaus. This also made it easier to choose which demonstrations I would attend for the 5 remaining rotations.

Lunch was followed by the 2nd rotation. I had selected to attend Nick Cook's "Production Turning for Sale" but ended up splitting time between Jimmy Clewes "Colored platter" and Alan Lacer "Making and Using Hook Tools". The volunteer videographer for Jimmy's demo was needed in another room to fix a glitch in the video setup so I shot the first 10-15 minutes of Jimmy's demo. I missed the first 20 minutes of Alan's demo which I later found out was putting a burr on scrapers, but got to see the portion covering making and using the hook tool.

The last rotation on Saturday was Cindy Drozda's Finial box. Cindy made a beautiful little lidded box out of Holly and Mesquite with one of her trademark finials. She later donated it to the live auction.

The Saturday evening banquet, live auction, and silent auctions were next. At the banquet 3 people were honored. Clarence "Shorty" Hart received the 3rd "Desert Woodturning Roundup Recognition Award". Previous recipients of this award include Phil Brennion and Wally Dickerman. We tried to keep it a secret but enough whispers went around that Shorty knew he had been selected. In the end I think we're all glad that Shorty did find out, if we had surprised him like we had planned I think the shock of it all literally would have killed him. We also honored Bill Baumbeck of Arizona Silhouette with the first Sponsor award. Bill has done more for our local club and for the DWR than I have room to type. Lastly we honored Mike Lucckino. He's a former Arizona Woodturners Assoc. President and was the driving force and Chairperson for the 2007 and 2009 DWRs. Mike in turn honored the rest of the committee members for their contributions and for making his job easy.

We had a volunteer professional auctioneer this year to run the live auction. The results were fantastic. I don't know the final number but it was somewhat higher than I had expected. I contributed 2 framed photos to the auction, one for the live auction and another for the silent auction. Together the 2 photos earned somewhere between $200 and $240. Both went to the same bidder and I've had several other people contact me about acquiring copies, including Mary and Alan Lacer. Other auction items included demo pieces from Cindy Drozda, Jimmy Clewes, Mark St. Leger, and Bonnie Klein. Hans Finsterwalder and Keith Tompkins also donated finished pieces.

Sunday started at 8:30. I decided to see Mark St. Leger's "Sphere box" with hand chased threads. I'm not planning to hand chase threads or turn a perfect sphere anytime soon but it was still an interesting demo to watch and made me want to see more of Mark's demos.

Next was Keith Tompkins demo on "Priciples of form & design" I really wanted to Mark St. Leger's 2nd demonstration, "Third axis in motion" but wanted to see Keith's design rotation as well. This next demo of Mark's also had some multi-axis work so Keith won that battle. Keith talked about using the golden rectangle and the golden triangle as a guide to turning pleasing forms. Keith then went over the inspiration for some of his turnings, including Playing Hooky, Tango, Steppin Out, and Winter Rose. He finished the demo by turning a cube on the lathe, something I know he does that I couldn't quite put my head around but now that I've seen it done I can't believe it was that simple. He's definitely inspired me to try a couple of new things and to step out of my comfort zone a bit (Hi Keith!)

After Sunday Lunch I returned back to Mark St. Leger's room for his "Rock a Bye Box" demo. I had seen a small portion of this demo on Saturday morning and knew I wanted to see it in full. This demo involves pretty much everything; shop made jigs, multi-axis work, hollowing, and turning a block mounted on a bias. He's a great turner and entertaining as well. I highly recommend him to anyone who has a chance to see him demonstrate.

I think the quality of the instant gallery improved over 2 years ago, as did the selection of vendors. On hand this year were Arizona Silhouette, Sanding Glove, Don Pencil, High West Wood Products, Timber Woodworking Machinery (they supplied most of the lathes used by the demonstrators), Serious tools, Driftwood Connection, Craft Supplies USA, Woodworkers Source, Rotary Chisel, Alan Lacer, Woodcraft, Elbo Tools, Burs for Carving, and several others that I can't think of off the top of my head.

All in all I think a great time was had by everyone in attendance and feedback has been vastly positive. One comment I was made aware of that springs to mind is "I'm not a woodturner. My boss is and he asked me to come along. I will be at your next one even if my boss does not attend." If that's not a glowing recommendation I don't know what is.

Thanks

Jason

Re: Desert Woodturning Roundup 2009 review (very long)

#2

Re: Desert Woodturning Roundup 2009 review (very l

Wally Dickerman in Arizona

>Jason, I think that you and your club did a bangup job again, and are to be commended on how well the symposium went. I enjoyed it very much. There was a good mix of demonstrators. I didn't see them all but those that I did see were very good. My only suggestion is that the presenters be supplied with lapel mikes. I had a problem hearing a couple of them.

When I received the award at the previous symposium, it was a complete surprise to me. Quite a thrill.

Wally

Re: Desert Woodturning Roundup 2009 review (very long)

#3

Re: Microphones for Presentors

David Walser

>Wally,

We've heard the request for microphones from several people. Unfortunately, we've not found an affordable solution. The inverters used in the lathes' variable drive generate a radio signal that is picked up by the wireless lapel microphones. The result is typically a high pitched whine that's beyond annoying. The radio interference can be filtered out, but the only solutions we've found are expensive and need to be tuned for each inverter.

If any of you have any suggestions, we'd be glad to hear them!

Re: Desert Woodturning Roundup 2009 review (very long)

#4

Re: Microphones for Presentors

Jeff Rich

>Hi David,

If you are looking for a wireless mic try Shure or Audio Technica.

Point Source is who I would recommend for small over the ear microphones that sound way better than a lapel microphone.

They have a mic to fit most wireless systems on the market.

I need to check to see if they make a wired version that plugs directly into the sound system.

Re: Desert Woodturning Roundup 2009 review (very long)

#5

Re: Desert Woodturning Roundup 2009 review (very l

Dennis from Southern Oregon

>I too greatly enjoyed the DWR. My only regret is that it was not possible to see all of the rotations. Those that I could attend were very well done. I was also pleased to meet Wally Dickerman and Keith Tompkins in person after several years of following their exploits on Woodcentral. Can't wait for the next DWR. Dennis

Re: Desert Woodturning Roundup 2009 review (very long)

#6

Re: Microphones for Presentors

john lucas

>I've demonstrated with wireless mikes at the AAW symposiums and just recently at the Birmingham Alabama club. Both machines had VFD controllers and we didn't have any interference. Perhaps you could call the President of the Alabama club and find out what they use. The AAW has usually contracted with the facility we meet in to get their mikes.

Re: Desert Woodturning Roundup 2009 review (very long)

#7

Keith Tompkins

Re: Desert Woodturning Roundup 2009 review (very l

keith tompkins

>HI Jason, Well, I'm home! I left Albany, NY Thursday morning with zero temperatures...landed in Phoenix with 81 degrees! A bit of a shock. It was great to meet you, along with many new friends. I especially enjoyed meeting "Shorty"...what a character! He broke down when he told me about his wife's passing; his winning the award was a very emotional experience for him, and everyone in attendance. Among those I met were Don Pencil...I appreciate his generosity.

As anyone who demonstrates will attest, you need to be prepared for any emergency that may arise. I couldn't have anticipated that I would come down with the flu or food-poisoning Friday evening. With little or no sleep Friday night and still feeling ill, I couldn't make it through my first rotation on Saturday. You can't imagine how upsetting it was to consider that I couldn't complete my rotations. I rested over the lunch break, and managed to get through the remaining two rotations. Sunday was better, Gary Ljostad and his son Chris attended one of my demos; they could have seen my demo any time back in New York, so that was very rewarding. I was especially happy to have Wally Dickerman attend one of my sessions. Like everyone else, I really admire Wally, and was absolutely delighted to have him sit in. (and a bit nervous)

My wife and I spent Monday with Dave Smith and his wife Sandy, exploring the sights of the desert, what a great time! We ended up in a ghost-town saloon; the characters at the bar reminded me of an old western movie..I was tempted to approach one of them and say "This town's not big enough for the both of us partner", but Dave convinced me that it wasn't such a good idea. Really, really, not a good idea.

Now that I'm home, I need to build a new tool storage rack, I picked up way too many new tools. I just want to say thanks for everyone's support, and what a great show!

Re: Desert Woodturning Roundup 2009 review (very long)

#8

Re: Desert Woodturning Roundup 2009 review (very l

Sam Scalzo

>I too thought that the Desert Roundup was great. Not enough time to take in all the demo's. Vendor setup was great. Food was great. Those who missed it missed a great time. We at Southern Arizona Woodturners in Tucson are very blessed to have Wally Dickerman as a member. He has contributed much to our club. Thanks Wally.

Re: Desert Woodturning Roundup 2009 review (very long)

#9

Re:I have used the cheapo Radio Shack...

Jamie D

>...wireless mics without any interference on several different VFD equipped lathes. The mic pick-up distance is not as great as the more expensive systems, but it works well if placed right at the lapel or shirt collar distance.