Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Abingdon, VA – Tree Cutting & Portable Sawmill

MDF Honing wheel ?s

Posts

MDF Honing wheel ?s

#1

MDF Honing wheel ?s

Jim Stoppleworth

>I made a MDF honing wheel for my skews per the Alan Lacer DVD. Does anyone here use something like this to get a final "great" edge on a skew? I've trued the MDF wheel on the lathe while it was mounted on the arbor mount from the grinder. When it is on the lathe it runs true but it isn't quite perfect when I put it back on the grinder? Any ideas on getting the last little imperfection out so it runs perfectly true when mounted on the grinder. It is turning away from me so the one thought was to use a flat file on it? Yeah, Nay?

Re: MDF Honing wheel ?s

#2

Re: MDF Honing wheel ?s

john lucas

>Jim When I did it I jury rigged a tool rest on the grinder and used a scraper to true up the wheel.

Re: MDF Honing wheel ?s

#3

Re: MDF Honing wheel ?s

paul waddle

>I thought the correct term was "jerry rigged"? Some one straighten us out-is this reginal dialect?? Like dem dar TN folks tend to talk a bit different from us Kientucks. he he

Re: MDF Honing wheel ?s

#4

Re: MDF Honing wheel ?s

robert davis

>jury rigged is what i have always heard

Re: MDF Honing wheel ?s

#5

Re: MDF Honing wheel ?s

Jim Stoppleworth

>Both are correct but slightly different in meaning:

Jury rig, while similar sounding, has a slightly different meaning, emphasizing the temporary nature of the solution and can imply an ingenious solution done with materials at hand. Jerry-built, on the other hand, is often used for a permanent, but poorly built, construction and has no positive connotation.

Re: MDF Honing wheel ?s

#6

Re: MDF Honing wheel ?s

paul waddle

>Well now, we can't go about spreading bad connotations and such. I herby defer to "jury" rigged as the prefered rigging.pw

Re: MDF Honing wheel ?s

#7

Re: MDF Honing wheel ?s

Jim Stoppleworth

>Generally Paul when I jury rig something it doesn't come under the heading of "ingenious use of materials at hand". Most always it would have to be referred to as "jerry rigged". Growing up the only phrase I ever heard was jury rigged, and it usually did not mean anything good.

Re: MDF Honing wheel ?s

#8

Prototype?

Texian

>A successful prototype that functions well, though perhaps unattractive (jury?), may continue in long term service. A somewhat less successful (jerry) prototype may function adequately for short term use, is unattractive, and will soon be replaced by an improved model.