glass within a wooden bowl?
Don in Ellensburg,WA,
>I have a long time interior decorator customer who wants some raw bowl blanks from me so that he may work with a glass blower in his city to blow the molten glass size just out of the kiln into the wooden bowl/base
then remove.cool and replace into the wood.after hardened.
My question is has anyone done this themselfs? if so problems?
types of wood? ie maple cedar elderwood burls?
ways we could prevent total destruction of the bowl from the heat of the molden glass. and he wants them tapered from thicker at the bottom to about 3/16 at the upper edges some 6 inches deep again
rasing questions to me about the wood burning off!
Tks in advance.



