Staying out of Mother Nature's way *LINK*
Mike Hamilton
>Looks like my respite from employment is about to end, so I thought I�d better hurry up and finish a platter I roughed out a few months back. Especially since I had to borrow lathe time on a 4224 to do the work. This one is all on Mother Nature; I just tried not to blow it up. Finished size is 15 3/4 by 2 1/2 by 3/8 thick. Finish is Bush Oil. Drying via denatured alcohol.
Better figure is on the back (pith) side.
Just a simple bowl shape rather than losing figure to a rim � it moved a bit during finish turning.
This is from a tree my BIL gifted me about the time my unemployment started in late August. The story of the milling of the tree was outlined on the main board a while back (see link below for the picture details, last 6 pics are the finished platter).
This is by far the largest piece I�ve done. I had lots of encouragement and a bit of chainsaw and turning technique help from a number of WC folks.
Hope this embedded image thing works out.






