>Our club is looking at purchasing a quality video camera that we can use for close-ups during demonstrations as well as for recording digital video for distributing on DVDs or posting on Internet/Web sites. We'd like the camera to be useful in a fairly wide range of light and distance situations, as well as having the ability to feed digital or composite video signals into our digital projector unit for use during demonstrations.
I'd like to ask those knowledgeable about these units to make some suggestions regarding brands and models of video cameras to consider that have worked well for your turning clubs (.....or those to stay away from!). We'd be looking at an expenditure between $ 600 and $ 1,000 for this video recording camera unit......possibly looking at the small "Woodchuckers" cameras for later addition to the system
Any recommendations about specific cameras, or features that would be most helpful (....as in autofocus override to manual focus, which I have been told is really useful when trying to focus on a spinning object!). Macro capabilities probably would be good too... I'm a novice with video camera selection, so please be gentle...!
>It has been 2 years since I was in the market for a camcorder in that price range, and the landscape may have changed since then.
You are going to have the selection of several cameras in that price range from Sony, Canon, JVC, and Panasonic. The lens quality, exposure and focus adjustments will be similar on all brands, and only the presentation of the adjustments will vary. All of them will have a lot of editing features and still picture capabilities that come with the package, but you will probably never use.
I chose Sony again because they still had the better low-light capability, and that was the most important factor to me for shooting video close-up in a shop environment.
>... formerly available from Woodchuckers are no longer available from him. You can find an updated replacement set-up from www.123CCTV.com as #2445c Sony Ultra-mini camera and camera switcher #2704ns.
>What EVER you do, get one that will not automatically switch off or to a demo mode after some period of inactivity. I've seen both in demos and it is annoying. I have no idea which models behave like this. My 3-chip Sony doesn't, but I don't think you need that much camera.
My preference for such things is not a camcorder but a dedicated simple color camera. I've bought several of these from a local electronics shop that were made for security cameras. Pluses: very small and light-weight so they can easily be suspended from a lightweight boom or mounted practically anywhere; can focus down to a few centimeters if needed; excellent picture. Minuses: no zoom, and focusing is manual and not quick. However, perfect for a camera set up and left alone for example above the lathe looking down. Less than $200 or so. These are tiny things, about 1" in diameter and just a few inches long.
Put this over the lathe and add a second camera for side shots. You need a video switcher but the simple ones are cheap. If you want to record, you can add a VCR or dvd recorder.
>IMHO it's hard to beat the Canon HV-30. I've had mine for about 8 months and would buy it again. It's in your price range, uses mini DV tapes making editing a breeze with a modest computer set-up and gives you a hard copy backup. The HD or SD video looks stunning.
>I have the JVC GZ-MG77U Hard Disk Camcorder. It has the capability of burning directly to a DVD burner. You can load the files into your Computer and edit and then burn. It records to a 30 GB hard drive and will get you 14 hours of recording of regular video or 7 hours of ultra fine recording. The files are recorded into 4 GB files which I can then turn right into DVDs, I believe that normal gets you 2 hours on the 4 GB file and ultra fine gives you 1 hour for the 4 GB file. Too much more stuff like all cameras will do to talk about. These are now selling in the $350 to $400 range. I am now looking at the High Definition versions that are in the $700 to $900 range at the moment