Indexing on Mustard 2036
Phil Murray
>Lost track of a link to a source for an indexing jig for a Powermatic 2036. Could someone assist?
Phil
Knowledge You Can Build On — Est. 1998
Indexing on Mustard 2036
Phil Murray
>Lost track of a link to a source for an indexing jig for a Powermatic 2036. Could someone assist?
Phil
Re: Indexing on Mustard 2036
john lucas
>One of them is at the website below. The one I like is sold by Micheal Hare out of Atlanta but I would have to be at home to give you his phone #. It's VMwoodworking but he doesn't have a website. His has larger holes so the you don't lose the little index pin. In fact they are 1/4" so you can easily make your own. The ironfire index plate uses a small odd sized pin that you can't easily make yourself.
Micheal's index plate also has number markings at all the holes making it easier to count from one to the next. If someone else doesn't post his number I will do it when I get home. I do have to work late tonight so it might be 8pm central.
Re: Indexing on Mustard 2036 *LINK*
Tommy Holmes
>I've just picked up one of these but haven't used it yet.
http://alisam.com/page/14g9e/Woodworking_turning.html
Re: Indexing on Mustard 2036 *LINK*
Tommy Holmes
>I should have posted this page for the Mustard. Sorry. I liked their system because of the bracket with the spring pin in it to set the proper hole. No connection with the company.
http://alisam.com/page/14g9e/Woodworking_turning.html
Some good ideas at this Link *LINK*
Jerry Hall
>Go to "Indexing Page"
http://mustardmonster.googlepages.com/