>I'm going to make some spurtles as gifts for friends with Scottish ancestry. I figure on maybe 12" long. What do ya'll think would be a comfortable diameter for the handle? I'm figuring on ~1 1/4" or so for the "body" diameter.
>I generally have mine at about 1 inch diameter max, and about 12 inches long. I use a 'thistle' detail on the handle end, and I think I got that from Richard Raffen's project book. It is a tool for the kitchen that thought they had everything. They do sell, and are an excellent project for learning to use a skew chisel. I have had a number of people come to me after getting them and comment on how useful they are.
>I copied the pattern from one my mother picked up at Edinburgh Castle. It is a little less than 3/4" at the widest, tapering to about 1/4" or 5/16". I love that turning requires measurements like "about 1/4" or 5/16" "! If I had batteries around this place, I would take a pic. Not much help but it is the best I've got.
From Richard Raffan's book "Turning Proects", chapter on spurtles, pages 10-15: 12" long by 3/4" in diameter. Most he illustrates are tapered wide at the bottom, narrow towards the top, then wide again with some details to form a handle.