Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Domestic, Figured & Live Edge Hardwoods in Stock. Best Prices for Serious Woodworkers.

*** SURVEY: THE IDES OF JANUARY +10 ***

Posts

*** SURVEY: THE IDES OF JANUARY +10 ***

#1

*** SURVEY: THE IDES OF JANUARY +10 ***

Ellis Walentine, Host

>Well folks, things have been pretty hectic around here the past couple weeks as I attempt to break in a new computer without breaking everything else. In the shuffle, my Ides of January question never materialized, so we don't have much time to log our answers. My deadline is in about 10 days. Once again, we'll be excerpting your answers for our bi-monthly column in Woodwork Magazine.

This time, the topic is all about change:

1. Are you using hand tools more these days than you were, say, five years ago? If so, can you say why?

2. Have you changed other aspects of your woodworking routines, habits, interests or preferences, and, if so, why? You might have noticed a change in the types of projects you do, or the source of your ideas or supplies or plans. You may have changed the amount of time you spend in the shop or the complexity of the techniques and projects that interest you. I want to know how your woodworking is evolving, or isn't.

There are no right answers here. Thanks to all for participating!

Ellis Walentine, Host

Re: *** SURVEY: THE IDES OF JANUARY +10 ***

#2

Brad Vietje

Re: *** SURVEY: THE IDES OF JANUARY +10 ***

Brad Vietje

>1. Hand Tools: I make a lot of hollow forms when I get time to turn. While I have a stabilized boring bar system, I prefer to turn all but the large ones with hand-held tools.

2. Change/evolution in turning: Since I am now busy in the solar business during warmer weather, and don't have a heated shop yet, I turn more small and quick stuff so I don't have to bear too much cold. When my new house is finished this summer, I can move my "shop" into our current house, and have a heated shop space at last. That's some change I could really use! I'll also be generating my electricity with solar panels, as well as heating the new house with an exciting new solar heating system, which is change the whole world can use.

Safe spinning,

Brad Vietje

Newbury, VT

Re: *** SURVEY: THE IDES OF JANUARY +10 ***

#3

Re: *** SURVEY: THE IDES OF JANUARY +10 ***

Jim Canning

>1.Hand Tools: Not really using any more then before

2. Change/evolution in turning: Since I have been unemployed for the past 11 months I have changed the way I do some things. I turn only green wood that I collect at my towns tree dump or get from people cutting down live trees. I tried boiling the wood in water then I tried soaking in alcohol. I am going back to boiling the wood in water. And of course I am turning a lot more now because I have the time to do so. I finally took the big step and got into my first two craft shows before Christmas and now looking forward to my next one.

Re: *** SURVEY: THE IDES OF JANUARY +10 ***

#4

Re: *** SURVEY: THE IDES OF JANUARY +10 ***

Brian Hahn in SW Wisconsin

>For flat-work, when I occasionally do it, I still use whichever tool makes sense - best / easiest / quickest / safest.

If you consider woodturning tools to be hand tools, I'm using them a lot more now than 5 years ago when my woodturning was in a long hiatus.