Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Precision you can feel — woodworking perfected with Lee Valley

Toys & Glue

Posts

Toys & Glue

#1

Toys & Glue

Ed Conhaim

>Am making some toys and some of the parts need glueing, mostly where axles attach permanently. The plans call for epoxy. Am wondering about the advantages/disadvantages of epoxy vs CA vs urethane. Would appreciate any info...thanks

Re: Toys & Glue

#2

JL

Re: Toys & Glue

JL

>Epoxy would be among the strongest. Epoxy also has the capability of bridging gaps. Epoxy is also quite visible and doesn't take stains well.

CA can be strong, but I find it somewhat brittle. It doesn't bridge gaps well. It will sometimes take a dye.

Urethane - I think is a poor choice. I personally don't like it.

You haven't mentioned hide glue or yellow glue. I use both and I like them a lot.

Re: Toys & Glue

#3

Richard Allen

Re: Toys & Glue

Richard Allen

>Epoxy? There is a little bit of a learning curve with epoxy. Once you are past that learning curve you will find epoxy has some wonderful qualities which don't exist all together with any other glue.

Flexibility - epoxy remains slightly flexibility which lets it maintain grip under shock and stress.

No-creep - epoxy doesn't creep Flexibility and creep tend to go together so this attribute along makes epoxy unique.

Water proof - cured epoxy is not effected by water

Long open time - actually the open time is controlled by the hardener used.

Very little tack - when epoxy is first applied the surface is very slippery making positioning of the surfaces simple.

Gap filling - epoxy can fill gaps without loss of strength.

Fillers - epoxy takes fillers so that epoxy can be thin as water or thick as toothpaste.

Color - color can be added to epoxy

Food contact safe - properly cured epoxy is safe for contact with food

Structural - epoxy can be used as a structural component