Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Portable Sawmill & Tree Service – Abingdon, VA

Turning Rosewood & Finishing it

Posts

Turning Rosewood & Finishing it

#1

Turning Rosewood & Finishing it

Dustmaker Mike

>I am about to make a Salt and Pepper mill set. I am using Rosewood, I have two 3 x 3 x 12 blocks. How hard is it to turn? I remember using rosewood before it it did not work real well. Next what type finish works best on it. I want a semi gloss finish.

Thanks

Re: Turning Rosewood & Finishing it

#2

Re: Turning Rosewood & Finishing it

GaryG in MD

>Mike,

They turn just fine, but not all "rosewoods" are the same. Some are "normal", and some can be quite oily.

As far as finishing is concerned, the former take all normal finishes; the latter are best just buffed. If you want or don't mind yellowing, oils or shellac will work. If you want to keep the color as close to "as is" as possible, lacquer, water-based polys, or acrylic "matte" finishes will work (the latter shines up nicely). You'll probably be happiest if you do a little experimenting.

Let us know how it turns out, Gary

Re: Turning Rosewood & Finishing it

#3

Thanks and one more question

Dustmaker Mike

>if it turns out to be an oily Rosewood how will the salt and pepper react to it? Keep in mind I have ordered the kits (they should be at the house today)and have never made these before so if there is a sleeve or something in them I don't know yet.

TIA

Re: Turning Rosewood & Finishing it

#4

Re: Thanks and one more question

Sean Troy

>It should not be a problem with the salt or pepper. Always use a small teaspoon of white rice in your shakers. It absorbs all mosister and you don't get clumping.

Re: Turning Rosewood & Finishing it

#5

Re: Thanks and one more question

John K Jordan

>Mike,

I've made several peppermills from cocobolo and my wife, the pepper connoisseur, has noticed no problems.

JKJ


img

Re: Turning Rosewood & Finishing it

#6

Re: Thanks and one more question

John K Jordan

>>Always use a small teaspoon of white rice in your shakers.

We do this in shakers, but I think he said he's going to make peppermills. JKJ

Re: Turning Rosewood & Finishing it

#7

Re: Turning Rosewood & Finishing it

Barbara Gill, Remlik VA

>I have turned a fair amount of Florida Rosewood and have found it a joy to turn. I wipe one coat of oil and buff later.

Re: Turning Rosewood & Finishing it

#8

Re: Thanks and one more question

Sean Troy

>I should never respond to a post when I still haven't had my coffee yet :)