Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This $39 jig will make you a WOODWORKING GOD!

metal lathe mats

Posts

metal lathe mats

#1

metal lathe mats

don lewonczyk

>John, I mentioned earlier about the mats I got used from a machine shop. They are about 3/4" thick heavy as anything and perfurated with 1/2" holes. Soft to stand on as the space the holes take up give as you stand on the mat, I didn't see very many metal shavings stuck in the mats. When im done working I peel back the mat and sweep under it but if im lazy I put the 4"D.C. hose to it and it gets pretty clean. The mats are also very flexible, you can fold them over on themselves and stand on the two halfes at the crease and it doesn't hurt it like it would woodcraft mats, I have some of them and the they are no match for the machine shop ones. My experience with them. DonL

Re: metal lathe mats

#2

Re: metal lathe mats

john lucas

>Thanks Don I actually have one of those. I didn't think about using it by the metal lathe because the holes were so hard to clean up wood shavings. I have it by my scroll saw. I'll move it over and give it a try. It is pretty tough. It's actually designed to be used in a wet or oily environment so the water and oil can flow through and under it. We had some in our photo studio.

Re: metal lathe mats

#3

Re: metal lathe mats

bowlman

>And where can one obtaine these?

Re: metal lathe mats

#4

Re: metal lathe mats *LINK*

john lucas

>Dick These are very similar. They also have lots of other matting.


http://www.teksupply.com/farm/supplies/ProductDisplay?catalogId=10053&catalogId2=10001&ftCatalogId=10001&storeId=10001&langId=-1&division=TekSupply&searchMethod=wcSearch&searchType=ANY&searchBeginIndex=0&searchDefaultPerPage=10&ftSearchBeginIndex=0&f

Re: metal lathe mats

#5

Re: metal lathe mats

don lewonczyk

>Mine were oily as they were used but I dragged them through the grass and road a couple of times and they cleaned up pretty good. The shop replaced most of the ones I got from them and they were tossing them out so my sons neighbor who works there picked them up and gave them to my son who gave them to me, thats what I call a deal. DonL