>Somebody gave a piece of Yew Tree. 18 inches across by 6 foot long. Still has some bark on it; a lot of knots and pits; he said that it has beedn sitting in in his gradfathers garage for about 5 years; so it should be dry. His grandfather was also a woodturner and he thought that I might like it; SO. Now, what do I do with it??? I never worked with this wood; help me out here; what's it best used for??? Suggestions??? Woodturning or firewood???
>18 inches across is a pretty big yew tree. Forget firewood, yew is very nice to turn and takes a good finish. Knots should be tight. It's prone to splitting, but as you say, it should be dry if it's been around for 5 years.
>Can't speak from experience with yew, but I would not count on it being completely dry. Consider treating your rough outs as you would any green wood. Might not be necessary, but worth considering.
Just a word of caution - some species of yew can contain chemical compounds that are considered 'toxic', skin irritants, or carcinogenic. Use caution when turning the wood, and especially when sanding, be absolutely SURE to follow good respiratory safety.
I've yet to turn any local Yew (although I have a chunk waiting). What I've heard has already been posted.
We do have locals that have (including one or two on this group), I'd suggest coming to the Bremerton turning club meeting, in two weeks, but it's going to be our delayed Christmas Party and not a regular meeting
Although it would be a great chance to socialize with other local turners
>18 inches in diameter??? Guess they must grow them bigger in the Northwest. The Yew we have here is rarely more than a large shrub and at best a small bushy tree. Our Yew turns well and takes a great finish. I don't have any problem with reactions to the wood.
>It turns beautifully with a very smooth finish right off the tool. Some people get allergic reactions to it. It does not seem to bother me, but neither does poison ivy.
Yew is the traditional wood for making chanters and drones for bagpipes.
>Yew is one of my favourite woods to turn. It is a 'soft' wood in that it loses its leaves in the winter, it dries reasonably quickly but is prone to splitting. 18" is not particularly big by UK standards I recently got some that came from some trees well over 36" in diameter. It had a nice colour contrast between the heart and sapwoods, the sap wood sometimes gets light spalting, smaller pieces look good cut as oysters across the branch. It cuts easily and takes a good finish, keep the speed down whilst sanding to avoid overheating it. Post some photos of what you make with it.
>Carole, the pacific yew is a different tree. It grows only in Western US and Canada. 24 inches dia. is maximum size. The trees are being poached because the bark contains taxin, a drug used in cancer research. I have a small yew log in my shop (10" x 3 ft). Haven't figured out yet what I'll do with it.
>The drug is Paclitaxel, trade-named under Traxol.
While it was discovered in the Pacific Yew, it is currently produced semi-synthetically.
The Pacific Yew was hit hard in the years between the drugs discovery and the synthetic process, but today it's no longer being commercially harvested.
>Pacific yew is a really nice wood. When they get to the size of the one you have, there tend to be a lot of knots in them, clear is unusual. Very tight grained. The wood you have may be dry on the outside, but won't be on the inside. Could make some nice decorative art bowls, boxes, or hollow forms. Getting utility bowls will be more difficult. It used to be harvested for the Taxol in it, but that is produced synthetically now, so there is little market for the bark now. I have never seen any of our yews without the leaves/needles on them, though there are some species of conifers that do shed their leaves in the fall.
Here is what a large Pacific Yew looks like. It is very stable and as others have mentioned, turns beautifully and finishes better. Like Ralph mentioned, please come to the Bremertom AAW meeting this month and every month thereafter.
>Thank you one & all for all the helpful info. I probably won't do anything with my piece of Yew tree until Springtime. I just wanted to get some ideas. Now I have to go and get me a real good respirator so that I can work with it; all I usually use is just some paper dust masks; but that doesn't sound like want I need. Just another excuse to make the drive up to the Seattle Woodcraft store. Thanks again for all your input.