40 Hours - One One Turned Vase?
charlie belden
>In the Readers Gallery of the Feb. 2009 issue of Fine Woodworking there's a pair of turned maple vessels - 9" diameter by 11" tall. The figure in the wood is really nice and the tung oil finish was done up there close to a high gloss look.
BUT - the description says it took 40 hours - each - to complete. So I'm wondering if that's elapsed time - or if he did 20 coats of tung oil, spending an hour with finer and finer abrassives once each coat has had a few days to dry/cure.
Three hours into any piece I turn and I've reached my patience level. On the other hand, I've never had a piece in the Rearders Gallery of Fine Woodworking.
Anyone here ever spend 40 hours on a turning this size - excluding carving, piercing, texturing etc.?




