Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This $39 jig will make you a WOODWORKING GOD!

Re: Wolverine Vari-Grind Discussion

Posts

Re: Wolverine Vari-Grind Discussion

#1

Re: Wolverine Vari-Grind Discussion

Ron McKinley

>Just found out there's a new kid on the block. Dave Hout was in SOCAL last week visiting a friend of his (who lives only a few blocks from me) and he was telling us about his invention for sharpening. It looks like an improvement on the Wolverine system that is much more precise. He showed it to us in the new Packard catalog and if memory serves it's called the Smart Sharp. He's going to send his friend one so I will get a look at it soon. (Can't find my Packard catalog right now and as of a few days ago is not on the Packard website.)

Has anyone seen/used this new system? .........Ron

Re: Re: Wolverine Vari-Grind Discussion

#2

Re: Wolverine Vari-Grind Discussion

Jorge Castaneda ~ Downeast Maine

>Ron,

Not a wolverine, but I got a Kelton sharpening system, it has a ball and socket articulation and the height of the socket is adjustable, so it is quite versatile and very substantial, superior to the wolverine, I love it.

Recently it was on sale at Craft Supplies, check it out.

Highly recommended

Jorge

Re: Re: Wolverine Vari-Grind Discussion

#3

Re: Sharp Fast System

GalenV

>Fall 2008 Packard catalog page 22.

Says the sliding arm will fit the OneWay so must be copy of same square tube. Says angle of tool holder set with Allen wrench and does not look like there is a way to index it easily for other grinds. Marketing pitch is to buy another holder to be preset per tool! Seems the adjustable collar for height would allow for variations for height of grider and where it would ride the grinding wheel. Could just be another variable to remember per tool.

Two catalog pages and a total of five different manufacture's/style of holders so if nothing else it may bring down someones price.

Re: Re: Wolverine Vari-Grind Discussion

#4

Re: Wolverine Vari-Grind Discussion

Gordon Seto

>Dave Hout introduced the system at our Club prior to the Richmond Symposium. He invented this system out of necessity for teaching classes at John C. Campbell. His experience was in his classes, he has to spend a lot of time watching the grinding station during the first couple days of his classes. Usually some student would ran the tool off the wheel surface, and chip the wheel in each and every class. His system is a ball and socket construction, the tool is restricted and can not go off the center of the wheel. He and his class assistant can concentrate on teaching since he started using his system. His system also replace the spring of the Varigrind that holds the tool with a ball bearing. He also has an upgrade kit for the existing Varigrind.

I believe the strong point of this system is also the down side of this system. We can't use the whole width of the grinding wheel to even out the wear. You either have to true up the wheel more heavily to take out the grooving at the middle of the wheel, if you use the same wheel for gouges and flat tools like skew. Or you will need to have a dedicated wheel for gouges.

Allowing the tool to run off the surface of the wheel can be dangerous.

That's the observation I have from his demonstration; I have not actually use it.

Re: Re: Wolverine Vari-Grind Discussion

#5

Re: I tried the one Dave left at ......

Jamie D

>....the Folk School, and I couldn't easily duplicate my version of the Ellsworth grind. It does help to keep the tool in the middle of the wheel, but that is seldom a problem once people have used a grinder a few times under supervision. I consider it to be just another gadget most of us don't need.

Re: Re: Wolverine Vari-Grind Discussion

#6

Re: I tried the one Dave left at ......

Steve Worcester

>I bought one as a demo from them and like it better than the Varigrind. It will duplicate the Ellsworth grind with proper setup. The wings get ground away from the center, so you are using the full wheels width. It will go into a Oneway setup, but you may have to file the tubings edges a bit to get a smooth slide. Setup is a bit quicker and replication of grind is about the same.I don't like it as a full replacement for the entire Oneway system in that their locking mechanism is taller than Oneways and when you swap the arm out with a platform for scraper sharpening, it can pout it below center even on an 8" wheel

http://tmiproducts.net/SharpFast%20Flyer.pdf