Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This is the most versatile work station you will ever use

Rikon's big lathe

Posts

Rikon's big lathe

#1

Rikon's big lathe

Steven Kubien

>Hey there,

Anyone have any experience with their non-mini lathe? I never t come up in conversations when people are upgrading from mini lathes or small stationary lathes (like Jet 1236's and the like).

Just curious.

Steve Kubien

Re: Rikon's big lathe

#2

Re: Rikon's big lathe

Bill Grumbine - Kutztown PA

>I've done a couple of demos on it Steve, both for Woodcraft stores. The first one, some of the big shots from Rikon were there, and the manager of the store asked me to "push it hard". So I did. The lathe has lots of power. Once you get it set on the proper speed range, you can still stall it, but it is going to take some work.

The lathe is built along the lines of the old Woodfast lathes. It is very sturdy and well built. The one thing I did not like about it is the control box. It is designed to be bolted on in various locations on the lathe. None of them are conducive to being able to see the speed or reach the controls easily, at least for me. Someone else may have a different opinion. Other than that, it was a very nice machine.

Re: Rikon's big lathe

#3

Re: Rikon's big lathe

Steven Kubien

>Thanks Bill.

Re: Rikon's big lathe

#4

Dick Hines

Re: Rikon's big lathe

Dick Hines

>Bill you could stall a train. You big bully picking on that poor little Rikon lathe.