Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

ADVERTISE HERE - FREE TRIAL

So anyway, I got a nice gift card in the mail.

Posts

So anyway, I got a nice gift card in the mail.

#1

JL

So anyway, I got a nice gift card in the mail.

JL

>And as I got it because of something turning related, I figured I'd spend it on something turning related :).

So I figured I'd solicit opinions. I have a reasonable number of tools (gouges - both spindle and bowl; scrapers, skews, etc.). I don't have anything for hollowforms, but I have been doing mostly spindle work. I have a couple of chucks (only one set of jaws for each with a large mega jaw for the Stronghold). I have drive centers and live centers. I am well equipped in the sharpening department.

I've thought about Hunter Tools and a Sorby Termite - but I am willing to listen to anything.

TIA.

Re: So anyway, I got a nice gift card in the mail.

#2

Re: I advise forgetting about the ......

Jamie D

>... Termite and buying the #5 Hunter tool instead. It is much more user friendly and versatile.

Re: So anyway, I got a nice gift card in the mail.

#3

Re: I advise forgetting about the ......

John K Jordan

>I agree with Jamie D. The Hunter #5 is pert near my favorite tool now. I put it in a Monster handle.

JKJ

Re: So anyway, I got a nice gift card in the mail.

#4

Re: So anyway, I got a nice gift card in the mail.

Michael Stafford

>Jerome, I will make it a trifecta and endorse the Hunter #5 also. Cuts almost anything and leaves a near polished surface.

If and when Mike Hunter comes out with a #5 swan neck I will be lining up to get one.

Re: So anyway, I got a nice gift card in the mail.

#5

Re: So anyway, I got a nice gift card in the mail.

Greg Haugen

>I'll make it a "Quad". Hunter #5! It's one of my favorite tools in the shop and use it on everything from boxes to bowls. Nothing against the termite, but it's not a Hunter #5. I have a nice maple handle on mine.

I'll be in line behind Mike. :-)

Greg H.

Re: So anyway, I got a nice gift card in the mail.

#6

Re: So anyway, I got a nice gift card in the mail.

Norm Smith

>You say that you want to do some hollow forms ,If so get the Don Pencil Scorpion.

Norm

Re: So anyway, I got a nice gift card in the mail.

#7

JL

Clarification it is a Woodcraft gift card

JL

>Therefore I can only use it at Woodcraft online or in the store.

Re: So anyway, I got a nice gift card in the mail.

#8

Re: Clarification it is a Woodcraft gift card

Ed Heuslein

>My local Woodcraft (Addison, TX) carries Hunter tools. As usual, I agree with Mr. Tibbits - so make me number cinco for the Hunter.

Re: So anyway, I got a nice gift card in the mail.

#9

Re: Clarification it is a Woodcraft gift card

Ed Heuslein

>Well, I screwed that one up. I meant, of course, Mr. Donaldson. To explain, I've met both Malcom and Jamie and I consider both of them to be the epitome of the word "gentleman." Therefor the confusion when I posted without thinking.

Re: So anyway, I got a nice gift card in the mail.

#10

Re: Clarification it is a Woodcraft gift card

Cyril Griesbach

>Another vote for the Hunter #5...I got mine at Woodcraft.

Re: So anyway, I got a nice gift card in the mail.

#11

Re: So anyway, I got a nice gift card in the mail. *LINK*

Greg Haugen

>JL,

Have no fear, here's a link.

Greg H.


Hunter #5 at Woodcraft

Re: So anyway, I got a nice gift card in the mail.

#12

Re: So anyway, I got a nice gift card in the mail.

Michael Stafford

>There you go Jerome. Greg has done all the work for you. Now all you have to is place the order....8-) ...and enjoy.

Re: So anyway, I got a nice gift card in the mail.

#13

Ever the rebel....

Molly Winton

>I'm going to divert you from the Hunter track, only to be contrary, not because I'm not a Hunter fan. I'd think about what type of turning you are considering. If you've mostly done spindle work, and you want to try something new, look to the tools that will support that change. You mentioned not having any, or limited, hollowing tools. If you want to give that a try, consider purchasing a Kelton hollowing set (size dependent upon the size of hollow forms you want to make). I've found the Kelton to be quite versitile as a starter set, because it comes with a straight tool, and two swan necks (different angles). They are very beefy, and because of this, avoid vibration.

Just a thought.

Re: So anyway, I got a nice gift card in the mail.

#14

You need a swan neck tool for hollow forms,

Norm Smith

>not the Hunter Tool. I have a few of the Hunter tool and they are all straight.

Norm

Re: So anyway, I got a nice gift card in the mail.

#15

JL

Can't seem to find it on the Woodcraft site..

JL

>I did find it at CraftSupplies USA. Did I mention the gift card was $100? While I am willing to spend a little more than the gift card, I don't want to spend too much more. I'd probably consider either the Kelton or the John Jordan set. I'm liking the idea of the Hunter. It's close enough to the $100, that I wouldn't worry about the extra bucks. Besides, the LOML has got me on a tight tool budget.

Re: So anyway, I got a nice gift card in the mail.

#16

See Greg's link above.....

Michael Stafford

>Jerome, the link Greg posted above takes you directly to the Woodcraft listing for the Hunter #5.

Re: So anyway, I got a nice gift card in the mail.

#17

Re: You need a swan neck tool for hollow forms, *LINK*

Michael Stafford

>Norm, Hunter Tools come in two different swan neck configurations. See the link below.


Hunter swan neck tools.....

Re: So anyway, I got a nice gift card in the mail.

#18

JL

I was refering to the Kelton, not the Hunter

JL

>

Re: So anyway, I got a nice gift card in the mail.

#19

Mike,I am getting my foot out of my mouth

Norm Smith

>I didnt know the Hunter tools came in swan neck. They must be new out???? However, I should learn to check before posting.

Norm

Re: So anyway, I got a nice gift card in the mail.

#20

Not a problem, Norm....

Michael Stafford

>I don't know how long they have been available but I have had one quite a while, at least several months before the AAW Symposium last year.

They work quite well on smaller hollowforms and semi-enclosed type forms particularly if you are hollowing end grain which I almost always am when turning boxes.

Try 'em, you'll like 'em!

Re: So anyway, I got a nice gift card in the mail.

#21

Re: Mike,I am getting my foot out of my mouth

John K Jordan

>I have several sizes of the swan neck and they are fantastic for the gentle hollowing I like to do.

JKJ

Re: So anyway, I got a nice gift card in the mail.

#22

I like both Hunter and Kelton tools...

keith zimmerman, Normal IL

>I use my Hunter tools (#3 and #4) mainly to do a finish cut or when I do the inside of boxes. There isn't a better tool out there for these uses.

I use my Kelton hollowers to do the majority of my hollowing. They are really sweet when it comes to removing the bulk of the material. I use them both hand held and in my Kelton captured system.

I have had the opportunity to use the Hunter swan neck tools and they work well, as well as the Kelton tools, but I can't justify spending the money to add them to my toolset.

keithz