Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A natural, durable finish with minimal coats and fuss popular among woodworkers, flooring professionals, and furniture makers

Bottle Brush and Bottle Tree wood

Posts

Bottle Brush and Bottle Tree wood

#1

Bottle Brush and Bottle Tree wood

John Weeks

>As I was drinking my first cup of coffee this morning I heard the sound of a chain saw. Naturally I was drawn to it, since where there is a chainsaw, there is also wood! My neighbor was converting their front yard to desert landscape, taking out a Bottle Brush tree and two Bottle Trees. So three hours later I had twenty chunks of each piled in my back yard and sealed with anchor seal. A great start to the day.

Anybody have any experience turning either of these?

Re: Bottle Brush and Bottle Tree wood

#2

Re: Bottle Brush and Bottle Tree wood

Sean Troy

>Hey John, long time no see. They turn well. They should be pretty stable unless they were on a drip system and got watered a lot. If thats the case, treat it as fruit wood.

Re: Bottle Brush and Bottle Tree wood

#3

Re: Bottle Brush and Bottle Tree wood

John Weeks

>Hi, Sean! Keeping warm? I note that all of today's activities were accomplished wearing jeans and a tee shirt:-)

A few of the pieces started to check in less than an hour, but the anchor seal should halt that. Turned a piece of the Bottle Brush down - it had a beautiful red color when wet. As it dried it changed to a light sand color. I'll let it dry enough to sand and see what effect oil, shellac and varnish have on it.

JW

Re: Bottle Brush and Bottle Tree wood

#4

Re: Bottle Brush and Bottle Tree wood

Sean Troy

>A little cool :)

Re: Bottle Brush and Bottle Tree wood

#5

Re: Bottle Brush and Bottle Tree wood

bob elliott

>My experience with (Florida) bottle brush has been quite positive. I've found it to be quite stable, even in whole log form.


img

Re: Bottle Brush and Bottle Tree wood

#6

Re: Bottle Brush and Bottle Tree wood

John Weeks

>Very nice piece, Bob. I'm starting to value it more and more. What finish did you use?

Re: Bottle Brush and Bottle Tree wood

#7

Re: finish

bob elliott

>Thanks John. I used Formby's� Tung Oil Finish low gloss. Applied 3 coats with a cloth. Pictured is a 16 oz. can but I've seen an 8 oz. plastic bottle at a local Ace Hardware. Note that they call it Finish. It's not straight Tung Oil, it has a dryer added. The MSDS says it's "modified soya tung alkyd-resin finish", and under product composition it lists "proprietary mixture".

From what I can tell, this finish is a lot like Minwax� Wipe-On Poly in ease of application and protection.


img