Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Fast and affordable laser cutting – so you can make the parts you can’t find anywhere else

I need a new wheel for my grinder

Posts

I need a new wheel for my grinder

#1

I need a new wheel for my grinder

Joe in a Cleveland Suburb

>Hi,

I have a 6" cheapo Ryobi grinder I bought at Lowe's a number of years ago. I want to put one of those white wheels on it that I read about.

Would one of these from Lee Valley be the right one? 80x or 120x?

Lee Valley grinding wheel

I should also get one of these dresser things too.

Are there cheaper alternatives?

This wheel would be used for chisels and irons.

Thanks for any feedback.

Re: I need a new wheel for my grinder

#2

Re: I need a new wheel for my grinder

Greg Haugen

>Joe,

Another option would be Sharpening Supplies; www.sharpeningsupplies.com

They carry "norton" wheels, white AO and both types of 3X at very reasonable prices, and usually the lowest.

As far as the dresser goes, that one will work and that's the cheapest option usually. The best dresser in my opinion is the one that Grumbine carries, www.wonderfulwood.com

As far as what grit? What did you have before? Did you like or not? If you liked it, why change it? I currently have a 60 and 120 wheels on mine. Depending on what I'm doing determines what wheel I'll use. If I'm roughing a bowl, I'll sharpen the gouge on the 60 grit or if I'm shaping a tool I'll use that one. If I'm "finishing" a bowl I'll sharpen that same gouge on the 120 along with all of my spindles tools. The grit debate is a personal perference. The whole issue of "burning" or overheating a tool on a 120 is hogwash! Too much pressure is being used, with proper technique this will provide an excellent edge.

If possible, try not to let price be the sole determining factor.

Hope that helps,

Greg H.

Re: I need a new wheel for my grinder

#3

Re: I need a new wheel for my grinder *LINK*

Gordon Seto

>Joe,

Listen to the recommendation from your neighbor, Doug Thompson. He may have used up more grinding wheels than the rest of the WC combined. He said he has tried them all.

He highly recommends the Norton 3X "K" bond 46 & 80 grit wheels. They run cooler, cut fast and hold up well. It is almost as good as the Norton SG wheel that sells for 3 times as much.


Norton 3X K wheels

Re: I need a new wheel for my grinder

#4

Re: I need a new wheel for my grinder

Sean Troy

>Do they make the K grade in the 100 or 120 grit?

Re: I need a new wheel for my grinder

#5

Re: I need a new wheel for my grinder

Gordon Seto

>No, K and SG wheels only come in 46 and 80.

Re: I need a new wheel for my grinder

#6

Re: I need a new wheel for my grinder

Sean Troy

>I wonder how much difference the tool edge has between the 80 grit 100 or 120 grit?

Re: I need a new wheel for my grinder

#7

Re: I need a new wheel for my grinder

RonZ

>I use these wheels and they're great. If you have a high speed grinder [mine's slow] 100-120 grit will burn the tool with normal use, 80 can do it too but not as often. I turn for a living and 80 is fine enough for almost everything I do. The only reason I might follow up an edge on my Tormek is that the edge lasts longer because its sharpend cooler [water]. Other finer ground edges tend to loose their edge faster.

All the above is my experience and M.H.O., mileage may vary.

Re: I need a new wheel for my grinder

#8

Re: I need a new wheel for my grinder

Bill Howatt

>I usually like LV products a lot but I have used these wheels and IMO they are way too soft. You will spend a lot of time dressing the wheel to get rid of the grooves and the wheel will disappear fairly quickly.

I recently got a 8" General International 1750 RPM grinder and am using the grey wheels that came on it with my Vari-grind jig. You do have to be a bit more careful but so far it works pretty good. The thing to remember with these wheels is that you do have to dress a wheel at some interval even if it isn't grooved to expose "sharp" grinding material.

I am still deciding if I want to get a white wheel or just leaving the grey ones.

Bill

Re: I need a new wheel for my grinder

#9

Re: A I00 or 120 grit wheel will NOT....

Jamie D

>.. burn HSS tools unless they are dirty and excess pressure applied while grinding. The edge from a 120 wheel is my preference for most of my turning tools, and some other fine edged tools like chisels.

Re: I need a new wheel for my grinder

#10

Re: A I00 or 120 grit wheel will NOT....

john lucas

>I agree-I use 100 grit wheels. As long as you use a light touch they don't but the metal.

Re: I need a new wheel for my grinder

#11

Nice addition to LV stock - Norton 3X-K

Bill Howatt

>Just got my LV January 2009 monthly catalog and on page 4 are Norton 3X - K bond blue wheels. My previous comment was not for these wheels.

Bill

Re: I need a new wheel for my grinder

#12

Hartville tools *LINK*

HeatherA in AK

>Hartville tools has the Norton 3x-K wheels on sale plus free shipping till Jan 31st (lower 48 only ARRGH). I got some for Christmas but haven't installed them because it has been below zero since then and I don't want to pay to heat up the garage.

Heather


Hartville tools