Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Support WoodCentral when buying things you need

1st hollow form off my new Kelton rig

Posts

1st hollow form off my new Kelton rig

#1

1st hollow form off my new Kelton rig

keith zimmerman, Normal IL

>This is the first hollow form to come off my new Kelton small hollowing rig. It is a piece of Big Leaf Maple Burl, given to me by Wally Dickerman a couple of months ago. The form is about 6" tall and is finished with Watco Teak Oil, followed by buffing on the Beall with tripoli and carnuba wax. The collar is hard maple, dyed black.

I found the Teak Oil at Menards and thought I would try it, but I don't care for it all that much. I'm going back to Waterlox, which I like a lot.

thanks for looking.

keithz


img

Re: 1st hollow form off my new Kelton rig

#2

other side 

keith zimmerman, Normal IL

>


img

Re: 1st hollow form off my new Kelton rig

#3

Re: other side

Ron McKinley

>Nice work Keith. You really nailed it........Ron

Re: 1st hollow form off my new Kelton rig

#4

Dick Hines

Re: other side

Dick Hines

>Nice work Keith. I like the second picture best. Keep up the good work.

Re: 1st hollow form off my new Kelton rig

#5

Rob Wallace

Re: 1st hollow form off my new Kelton rig

Rob Wallace

>Hi Keith!

Nice form - good proportions!

Questions: How long did it take for the teak oil to dry? What are the things about it that you don't like about teak oil? How much darkening does this oil develop (e.g. relative to boiled linseed oil...)? - I'm experimenting with finishes and would like to hear your opinions... thanks,

Rob Wallace

Re: 1st hollow form off my new Kelton rig

#6

Teak Oil

keith zimmerman, Normal IL

>I know it took over 12 hours for the teak oil to dry/cure, which I is too long to suit me. I applied the oil with a paper towel and wiped it off after applying it. The first coat was very thin, but was tacky after 4 hours (I checked it just before going to bed) and still very soft in the morning. When I got home from that night, it was still soft, but hard enough to apply a second coat. I followed the same routine on the third day. I set it aside to cure for several days. It was finally hard enough to handle after a week.

As to the darkening of the wood, since this is oil, I expected it to darken some, but it actually darkened it more than I thought it would.

I have never used BLO alone as a finish so I can't compare. My preferred oil finish is Waterlox, which I love.

keithz

Re: 1st hollow form off my new Kelton rig

#7

Re: 1st hollow form off my new Kelton rig

Cyril Griesbach

>Very nice, Keith. I use a lot of Danish Oil but I've found that the Deft product works much better for me than the Watco.

Re: 1st hollow form off my new Kelton rig

#8

Re: 1st hollow form off my new Kelton rig

Jim Canning

>Great! You did a great job, that is one nice turning job!

Re: 1st hollow form off my new Kelton rig

#9

That's a beaut Keith!

Molly Winton

>

Re: 1st hollow form off my new Kelton rig

#10

Re: 1st hollow form off my new Kelton rig

Jim Terry

>Keith, Very nice form and great piece of wood. With respect to the Watco Teak Oil, I use it once in a while on dark wood as I found it darkened more than Watco Danish Oil. I also found it slow drying if I left it slightly heavy, so I applied multiple coats wiping it down to very thin coats. Jim

Re: 1st hollow form off my new Kelton rig

#11

Thanks everyone, for the kind words

keith zimmerman, Normal IL

>