Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Need a tree taken down or milled?

turkey call plans

Posts

turkey call plans

#1

turkey call plans

dtaylor15

>I seen a turkey call, not the usual blow into it, but a round disk, hollow, with holes around the outside perimeter, it had slate in the top, and a wand to rub the slate, to make the sound, does anyone have the plans for it, or at least know where to locate them?...tks...it was a really nice call, and have a turkey for a friend, I mean a turkey hunter for a friend, get them mixed up!...ha ha Dennis

Re: turkey call plans

#2

Re: turkey call plans

Jake Niedling

>I have a sketch that I made for making one of these. I can scan it later this week and send it to you. You can buy the slate, just do a search on google. I bought mine from a company in Missouri.

Re: turkey call plans

#3

Re: turkey call plans

dtaylor15

>Thanks Jake, that would be appreciated, I will search for the slate...Dennis

Re: turkey call plans

#4

Re: turkey call plans

Bill Hunt

>I guess it's time to come out of the lurker's world and respond to the turkey call plans question. I'm Bill Hunt and I'm a wood turner, though at the moment I'm building an 11' wall of cabinets and book cases to go with a new 42" flat screen and a home theater system.( Bill Grumbine is gonna look really big). Anyway, I make turkey calls.There is a book of game call that has some info about turkey calls, but it's out in the shop and it's raining and I don't remember the title.

There are several companies that you can buy supplies from. I get most of my slate, glass , alumn. and copper from Brookside Game calls. Good quality and fast shipping. I use local wood, Poplar, Chery, Cedar, Black Walnut, Pecan, Sycamore, etc. I'm still using wood from Hurricane Katrina. there is a learning curve as with anything else. You'll have to experiment to get the correct sound. I tested Mike Hunters shallow swan neck tool to hollow a rounded side to the pot's. I also use only local woods for the strikers. when you make turkey calls theres bowl type turning as well as spindle turning. The strikers are 5/16" at the business end. If I can figure out how, I'll try to post some photos.

If I can help you just email me.

Bill Hunt

Re: turkey call plans

#5

Here is drawing and Instructions

jake Niedling

>Drawing:

http://www.customsawing.com/Friction%20Pot%20Dimensions%20II.pdf

Instructions:

http://www.customsawing.com/Friction%20Directions.pdf

Slate Parts: Grassy Creek Game Calls

Hope this helps.

Jake