Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Good Hope Hardwoods - Walnut Slabs & Specialty Hardwood Lumber

Wood ID please

Posts

Wood ID please

#1

Wood ID please

ShawnB

>My wife and I are on vacation in Yachats, OR. While beach combing we found a lot of washed up wood (trunks and branches) that looked like the below pictures. The bark, which you can see a small piece of in one picture, looks somewhat like birch. The wood surface beneath the bark is covered with short checks. This branch is ~1.5 inches diameter but there were trunks up to ~12 inches diameter and all of the surfaces had this appearance, even the large trunks. Can't be definitive on what it looks like in cross-section but most ends seemed to be red/reddish and sometimes had some white/whitish spots or streaks. Any ideas?


img

Re: Wood ID please

#2

Re: Wood ID please

Mike Jones, Redding, CA

>Shawn, I spent the better part of one wonderful year in Yachats. The only wood that I can think of that is indigenous to the area, and that comes close to your description, would be madrone.

Re: Wood ID please

#3

Re: Wood ID please

Allen Neighbors

>The upper portion of the pic looks like a Bois d'Arc Post that had been in the ground for years, pulled up and washed. :o)

I really have no idea. :)

Re: Wood ID please

#4

Re: Wood ID please

robo hippy

>Well, it could be Madrone (hard), Alder (soft), Big leaf Maple (medium), Myrtle (hard), and a host of other lesser known woods. A lot of stuff drifts down from Alaska, and a lot washes down from the mountains. Hard to tell. Most of the surf wood, if it has been in the ocean for a while will lose its scent, so can't tell that way.

robo hippy

Re: Wood ID please

#5

Re: Wood ID please

Ed Karch

>Used to work for the Forest Service stationed in Yachats. I would guess salal bush. Just a guess.