how to sharper your turning gouges vid *LINK*
North of the Border
>Worth your time watching:
http://www.woodworkingonline.com/2008/09/
From woodsmith
Free video
Knowledge You Can Build On — Est. 1998
how to sharper your turning gouges vid *LINK*
North of the Border
>Worth your time watching:
http://www.woodworkingonline.com/2008/09/
From woodsmith
Free video
This will take some time to watch :)
john lucas
>I will probably watch the whole thing later tonight to see how Brian Sharpens. He's been a friend for along time and is a very good turner. His dad teaches at Highland Hardware quite often so it runs in the family. When I first met Brian he was turning nearly perfect spheres and showed me really handy technique for getting them perfectly round. I'm very excited to see that he is doing some work for Woodsmith.
I find it interesting that they are doing a woodturning demo or article. With the exception of one article on how to build a wooden mini lathe they have never run one single article in woodsmith or shopnotes on turning. In fact they often run around in circles showing you how to do something with a router or table saw that could be done much safer and 10 times as fast on a lathe. Good magazines except for that.
Re: how to sharper your turning gouges vid
GalenV
>I really enjoy talking to Brian. He sold me my Jet 1220 when he worked for the Woodsmith Store in Des Moines, Iowa. He is no longer associated with them.
Brian sharpened my first Sorby bowl gouge. It had a convention grid and he ground it to a fingernail grind in short order. Basically starting me on my first bowl.
He has podcast #7 on turning a bowl and #25 on turning pens. Turns a pen with a 1 1/4 to 1 1/2" gouge and skew! The podcasts may be long to some but for a new turner I have watch them several time apiece.
If you ever run into Brian you will find he is a very knowledgeable young man and always willing to help you out.
Galen
Re: pen turning in #26
North of the Border
>
sharpening and bowl turning
John K Jordan
>I watched the entire thing last night (very long). While I do some things differently (i.e., sharpening skews and honing gouges), it's worth watching as a whole, especially for someone new to turning and sharpening. He seems quite knowledgeable even if a tiny bit "this is the right way".
I see he has another video on turning a bowl, but I haven't watched it yet. Click on "podcast" at the very bottom of the page and either hunt for #7, or pick Dec '06 from the list on the left. Seems like there was another one or two related to turning. Be warned they are large downloads.
JKJ
Add it to the Links!
Jerry Hall
>I agree we all could comment on the margins, but this video is right down the middle, and IMHO is the best general video on sharpening around. And the price is right. A new turner will be a successful sharpener from the get-go if they watch and follow this video. It should be added to the links.
Podcast are from edited one hour in store seminars
GalenV
>
Sorry, this is one of the worst in..
Gordon Seto
>SHOP SAFETY.
I haven't finish watching it. I only watched up to the wheel dressing part.
Open grinder without guard at all. The operator is absolutely not wearing any eye protection.
The risk is too great for the consequence.
I don't know why any company wants to put their name ties to this vid. With the link to a wood working magazine, it is legitimized as an instructional video. This is not a safe practice.
No matter how good the rest of the vid is, I don't think it is worth recommending.
Re: Sorry, this is one of the worst in..
Jerry Hall
>He does address safety later, and brings up the guard issue, explaining his choice is not necessarily a recommendation. I think it is a balanced point of view. We each have to make a choice.
Every woodworker must
North of the Border
>decide whether any demo. vid. is worth watching or following. This sharpening vid shows only part of the whole seminar and I believe Brian had addressed the safety issue at the beginning (before the camera started rolling) and he also addressed it again in the middle of the vid. However, many other woodworking vids also feature the craftsmen demonstrating his or her skills without the full safety gear. A case in point: the one featuring Sam Maloof working on one his signature rocking chair showed him working with the bandsaw blade exposed almost the full length with the guard not lowered. He didn't wear any mask or eye protection either. Many a time, these vids are not recommending any poor work habits but a particular rule is not followed for clarity reason. How could we expect a turner wearing his or her respirator while speaking to the audience in a vid? Many magazines and DVDs feature a tablesaw in operation with the blade guard, etc. for similar reasons.