Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

If you sell to woodworkers, your customers are already here

Fruit Cherry vessel

Posts

Fruit Cherry vessel

#1

Fruit Cherry vessel

Curt Fuller

>This is from a piece of fruit cherry that a friend gave me. It has some awesome color and figure. The knots are filled with a coffee-CA mix. Unfortunately the lid cracked, being endgrain with the pith in the center, so I filled it with black dyed epoxy. The finial is rosewood. 11" tall, 4.5" wide, with Deft semigloss lacquer.


img

Re: Fruit Cherry vessel

#2

Re: Fruit Cherry vessel

Curt Fuller

>This is what the wood looked like before turning.


img

Re: Fruit Cherry vessel

#3

Re: Fruit Cherry vessel

Ray Binnicker

>Curt,

Very NICE !!! I've looked at for a long time and I can't see a thing I would (If I COULD (:-) )have done differently.

Questions:

What did you use to dye the glue black?

How dry was the wood when you started?

Again, Great job !!!

Ray Binnicker

Re: Fruit Cherry vessel

#4

Re: Fruit Cherry vessel

nick

>I like this piece a lot, particularly the star-shaped checks in the knots. But I wonder why you used a blank with pith in it to begin with. Another small suggestion- the lid might look a little better if it filled up more of the recess it's set in- I mean it's set too deep for my taste. Still, overall I like it.

Re: Fruit Cherry vessel

#5

Re: Fruit Cherry vessel

Curt Fuller

>Thanks Ray!

The epoxy is dyed with the alcohol based dye from craftsupplies. Just a couple drops in a little 5 minute epoxy. The wood was pretty dry, I had to cut a couple inches from each end to get past the checking. But not quite dry enough to keep the thin lid from cracking. I probably should have soaked the lid good with CA and it might not have cracked.

Re: Fruit Cherry vessel

#6

Re: Fruit Cherry vessel

Curt Fuller

>Thanks Nick. I turn quite a few pieces from wood that includes the pith. There's a lot of character with the knots going out in all directions. As for the lid, I guess that's just my style. Wood always moves a little and a lid that doesn't line up exactly with any other lines on the piece doesn't seem to show the movement as much.