One of my other hobbies is homebrewing - I did a quick check of a few archived URLs, and came up with this one (Got Mead?) below that you might surf for more information. You might also check-out the Brewers Association & American Homebrewers Association (both at www.beertown.org) that have some information and publications like Ken Schramm's book, The Compleat Meadmaker ( See http://shop.beertown.org/brewers/product.asp?s_id=0&prod_name=The+Compleat+Meadmaker+by+Ken+Schramm&pf_id=3100_487&dept_id=3101 ).
I met Ken back in 2004 at the AHA National Homebrewers Conference in Las Vegas - I was a speaker at this convention, and I heard Ken give an excellent presentation - he's extremely knowledgeable. He might be contacted about identifying attributes of traditional mazers.
>Hello Brad and all -- At the Maryland Renaissance Festival a couple of years ago I talked to a fellow from Goodly Woods (link below, there's a treadle lathe video), a small operation that turns, finishes, and sells tankards and goblets for devotees of these fairs. They told me they use some stuff called Plasite made by Carboline, some sort of epoxy listed by manufacturer as a "tank lining." The website lists many Plasite products, so you'd probably have to call them to get the right item (http://www.carboline.com/product_brands.aspx#Tank%20Linings).
Good luck with the mead. Let me know when the first batch is ready....