Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This $39 jig will make you a WOODWORKING GOD!

Selling our work

Posts

Selling our work

#1

Selling our work

Russ Fairfield

>There have been a couple questions about selling our work on the forum. The following is the summary pf a Wednesday Night Chat Room about 3 years ago. This is all as useful as it was at the time.

"Marketing Our Woodturning".

1. QUALITY SELLS

Make sure you are ready. Get your work critiqued in a private session. Use an expert woodturner whose opinion you respect, or an artist in another medium. Pay for it if you have to. Enter your work in every exhibition that has comments and critique available.

Listen to what is said, even though it may be by someone other than another woodturner. Comments from someone who does not understand woodturning can be the most valuable because they represent the people who are BUYING our work. Their opinion may be more valuable to us than that of even the most "expert" of woodturners.

2. IF YOU DON'T TOOT YOUR OWN HORN, NOBODY ELSE WILL

We have to market woodturning and what we make. Get out there and sell yourself. We have to advertise.

A simple way to do this is to enter every exhibition that is available, whether it be AAW chapter, art group, or whatever. Many galleries will host a contest as a way of discovering new artists. There is usually no or minimal cost.

Investigate, individually or as a group, the possibilities for a display at library, City Hall and other public buildings, airport, post office, commercial building, University.

3. WEBSITE

Set up a website. The buying public expects you to have one. Having a URL is a useful way to show your work to a lot of people. It is the best $10 -20 a month you will ever spend.

The website is your resume. Art fairs and galleries are starting to use the artist's website as a verification of their work. It is the only way you will get many galleries to look at your work. Many art fairs are starting to use the website instead of slides for jurying their shows and exhibitions.

4. FOLLOW THE MONEY

You have to go to where there are customers with money who are willing to spend it. We often hear that selling art is like selling real estate,and the three (3) factors are location, location, and location. This is the same as saying, "Follow the money."

5. TAKE ADVANTAGE OF THE "HOME MARKET" FIRST

There IS a market close to home, but you may have to look for it. It may not be large, and it may not be high-dollar, but it is a good one for the woodturner to develop their turning skills, their display, and their selling personality. These are the Church bazzars, school functions, smaller galleries, furniture stores, home decorator stores and consultants, real estate sales people who buy gifts for their home buyers, gourmet cooking shoppes, etc. I could also include architects and custom home builders. The list goes on. The real estate people are a good market for weed pots (weeds have to be included) and bird houses.

Expand to a larger market when your skills and art start outgrowing this local one. You will know when that happens. Never abandon this local market because there will be times that it is all you have.

6. JOIN YOUR LOCAL ARTS COUNCIL (or whatever the group is called)

These are the art patrons of the community, and you are an artist. These are the people who are selling and buying art in your community. There is no better way to get the attention of a local gallery or entry into the local art fair. There is a lot to learn about the market for art from them, and they will always promote one of their own.

7. DONATIONS TO CHARITABLE ORGANIZATIONS

This one of the most neglected ways to promote our work. It is tax deductable, and we don't even have to be there.

These organizations have fund raising sales and auctions. The big charitable event of the year here is Hospice. People with money pay for the opportunity to buy things there, and usually at inflated prices. This places your work in front of people who will be buying. If it is a popular item at an auction, those who were out-bid will come calling.

8. DON'T FORGET THE SECONDARY MARKET

There are more places to sell turned wood than galleries, art fairs, and craft fairs. Many of them will take a lower commission or fee. Home and commercial decorators, and specialty stores for home and office furniture, housewares, kitchen and gourmet, gifts, and jewelry. There is good money in selling humidors through tobacco shops, and salad bowls through any store selling specialty oils and spices. Be innovative.

9. DON'T FORGET THE LITTLE ITEMS

Sometimes smaller is better. You might find that the same wood can be better used for making 10 weed-pots or little turned boxes than one (1) large bowl. Many galleries that are filled with high priced items will welcome things of lesser value. The same goes for your booth at the art fair.

10. HIGH ENTRY FEE ART SHOWS

These are listed last, because they should be considered only after all of the above has been realized. It can be true that, the higher the entry fee, the higher the potential for greater sales; but not always.

Tread lightly into this market. Scout these shows for one or more years before entering. Look at the other woodturners, see what they have, and see what they are selling. If they are doing well, they are your competition because they will be back next year.

11. WHOLESALE SHOWS

These can be a profitable venue for the woodturner, but one that should be considered only if you are ready to fill orders in quantities of 100's, have items that can be sold profitably at 60% below retail price, and you are ready to have an employee.

12. FAIRS and EXIHIBITIONS

Enter every call for an exhibition by the AAW or other organizations. Enter your work at the County Fair. The objective is to get your work out in front of people who might buy it, or who know other people who will. These events are usually a low to no entry fee. They are an �instant gallery� where people who aren�t woodturners can see your work. AND, you might win something.

Re: Selling our work

#2

Re: Selling our work

Hugh Widdup

>great advice Russ thanks for posting again!

Hugh

Re: Selling our work

#3

Steven Antonucci

Dead on+ so is Ruth below!

Steve Antonucci

>I think that the biggest problem most of us face in marketing our work is one of rejection. If you stopped by a location and asked about selling your wares, and they said "no", most people would cross it off the list. In a great many cases, I'd even bet that there would be a sense of rejection or anger.

If I were out there pushing my work and someone told me a polite "No thank you", I'd ask them "why?" If the work isn't good enough, if I am in the wrong location, if I don't understand their business well enough- all of these things are important for me to be successful!

We've all been in pretty Arts and Crafts stores, but have you ever asked the owners how much work they move? I did once, and found out that the gallery wasn't "rejecting me" as much as it was rejecting everyone. Seems they weren't selling anything because they weren't attracting the right crowd...

If you do get a reason, write it down. It may be an opportunity to "ring the doorbell again" downstream. Work diligently with building relationship with these folks, and eventually it will pay off. Eventually, they will become your "agents" and they will help you sell more as they market for you.

Steve

Who has been calling on the US Navy now for over 1 year, and getting closer to his first deal in 2009!

Re: Selling our work

#4

Re: Dead on+ so is Ruth below!

Sean Troy

>what about a Co-Op online gallery for turners by turners?

Re: Selling our work

#5

Re: Selling our work

Jim Shaver - Oakville, Ont------WebKitFormBoundary

>Good Post,

I have done a lot of that and it works.

My turning work pays for my flat work passions....

take care,

Jim

Re: Selling our work

#6

Brad Vietje

Re: Selling our work -- Pricing Issues

Brad Vietje

>Hi All,

Thanks for re-posting, Russ.

Another difficult issue is always pricing. Problems can arise at either end of the scale -- both over-pricing and under-pricing.

If you start local, and sell at craft fairs, farmers markets and the like, that's a great start. If you are selling servicable, nicely-made bowls for $40 - $80 at farmers markets and non-juried craft shows, you can have a lot of fun and even pay some of your bills. As you refine your craft, and begin making truly fine pieces that are one-off, artistic turnings, or very finely made turnings, especially if made from more highly-figured or rare woods, you'll probably have to sell these higher-priced items at different venues -- those that sell higher-priced items. Thus, with greater experience, you could price yourself out of certain markets.

Alternatively, you might need to produce two distinctly different lines of work -- say, "farmhouse" or "cottage" bowls, with less time, effort, detail, and finish work at a lower price point; and more refined, and higher-priced work. You might need to sell these in entirely different markets, such as a "craft shop" vs an "art gallery". You'll want to avoid any appearance of selling the same stuff at two different prices, however...

When you feel ready to enter higher-priced markets, your work must be consistently good enough to sell at that level, and this is where you should again seek feedback from others, as Russ points out. Generally, if you want to charge more, your work has to be good enough, and you have to be honest with yourself about it. "Good enough" can -- and should -- go well beyond the technical aspects of turning. I have seen turned bowls for sale that were well executed, and well-finished, with no sanding marks, etc... but with pretty dumpy or boring shapes. In juried shows or galleries, these should be weeded out, and hopefully would fail to excite the tastes of the gallery manager. I've also seen higher-priced turned objects that looked good from a distance, but up close needed more sanding or a better finishing job with a price that I thought was too high. This can be a problem of pricing, ego, gallery management, or all three.

The opposite can also occur. If you sell beautifully-made and finely-crafted work for only $40 - $80 in places where similar work by other turners usually sells for 2-4 times as much, you can do a real disservice to people who are already established, or trying to make a living at their craft.

A real problem can result from a very well-meaning turner who "Just wants to cover their wood costs...". These people are usually retired, or not at all worried about making any part of their income from their turning. Some of these folks produce very nice work that really should be priced higher. This can really hurt those who have to pay their bills from their wood turning. Again, a good shop manager would suggest a higher price. I saw a beautifully turned 6" diameter end-grain closed form bowl made from a nicely-figured piece of Masur Birch a few years ago with a price of $35 on it. I'll bet the chunk of wood was worth nearly twice that before it was even put on the lathe!

Local turning clubs can be helpful to those struggling with selling and pricing by holding occasional "critique" sessions, where turned works are examined and evaluated constructively, which can be delicate and difficult to do well. Craft show booths or gallery displays can be critiqued too, and probably should be. Some clubs bring in an outside (and neutral) well-known gallery turner, or even a gallery manager to help with this process.

Best of luck to all those selling their work in 2009, and a Happy New Year and safe spinning to all,

Brad Vietje

Newbury, VT

Re: Selling our work

#7

Re: Dead on+ so is Ruth below!

Russ Fairfield

>I know there will be other opinions and experiences, but I have always seen on-line selling of art of any kind as more hype than reality. However, there was a guy who sold other peoples pens on-line for several years. I have no idea how he did.

Re: Selling our work

#8

Re: Dead on+ so is Ruth below!

Jim Shaver - Oakville, Ont------WebKitFormBoundary

>I know the site Russ,

I contacted them once, was told my work was not up to their standard...I let it pass... looked there once a few years ago... not sure it exists anymore.

My thoughts on co-op sales is that it's too complicated to be worth it...

take care,

Jim

Re: Selling our work

#9

How about Etsy? (www.etsy.com)

Brian Hahn in SW Wisconsin

>

Re: Selling our work

#10

Re: How about Etsy? (www.etsy.com)

Ralph

>Brian

I've never tried Etsy, but I have friends (non-turners) that have. The time to sell can be really long and some have found that they get better results by "relisting" items every week or so.

Re: Selling our work

#11

Re: Dead on+ so is Ruth below!

Russ Fairfield

>Co-ops always fail because someone has to all of the work to keep them going, and that is never a cooperative effort.

The other common problem is that, regardless of how cooperative we may be, we will always favor our own work. The only work sold is that by whoever is manning the shop at the time, and the most successful artist in the co-op is the one who spends the most time in the shop.

Re: Selling our work

#12

Brad Vietje

Seems I Always Agree with Russ...

Brad Vietje

>I think the appeal of a lot of turned wood is the warmth of wood, and its "touch-ability", neither of which are conveyed very well by photos on a web site. For bowls and simpler turned objects that can be touched by customers, people often fondle them before buying, and I think the warm feel of wood helps sell it. I've set up a display at a Christmas craft show and put out very cold pieces that had slept in the car, and the response to touching the pieces was very different earlier in the morning when things were cold.

As for co-op's, I think they would work well in a brick & mortar sense, (I'm even toying with starting one), but I wouldn't be that interested in an on-line selling co-op.

Safe spinning,

Brad Vietje

Newbury, VT

Re: Selling our work

#13

Re: How about Etsy? (www.etsy.com)

Brian Hahn in SW Wisconsin

>I have a friend (a potter) that recently started using Etsy and his results have been the same.

Re: Selling our work

#14

Re: How about Etsy? (www.etsy.com)

Ralph

>Mine are a potter and a jeweler, don't know any turners on. But watching the site it appears the time-to-sale is longish

Re: Selling our work

#15

Re: Selling our work -- Pricing Issues

Thom Sayles

>If your goal is have a hobby and not a job, then selling at Christmas bazaars and farmers markets for a reasonable price is the trick. I sell my bowls in the $30-$60 range and make enough to go buy tools and supplies. I do not make much, maybe $2000-$3000 a year selling at 3 or 4 times a year. Good enough for me. Some turners has been selling at these shows too and they soon learn what the market will bear. Expensive bowls don't sell at all here.

I enjoy talking with the customers and getting leads for free wood. Maybe someday I will make bowls that are worth more because of form or craftsmanship. I am not there yet, maybe I'll never be there but I enjoy making bowls. Tis also helpful that I am retired and am not in need to the income. In the 5 or 6 years I have been turning I think I have made and sold over 500 bowls. I plan on making another 100 this year. Hope this incite into what I do helps. I also hope that I am not hurting the sales of some turner who charges $300 for a bowl.

Re: Selling our work

#16

Re: Selling our work -- Pricing Issues...but

Ruth Niles

>I support myself with lathe work, have done so for 12 yrs. I do mostly architectural reproduction work, although both the antique business and construction business are quite slow at this time.

I sell bowls in the $45 - $100 range, I need the cash flow and I don't have a "name" (well, I do but it's nothing on the bottom of a bowl) and I can't wait 2 or 3 months to get paid. I need to price my work for quicker sales to buy heating fuel. : ) I've been chastised for not pricing in accordance with other turners selling at the same artisan gallery. I apologized but I don't have a working spouse nor a retirement check. I am not an artist, I'm a working woodturner. When they sell a bowl for $250(+), that doesn't help me pay my bills. I've never responded to this subject before because it's a little embarrassing to admit I'm not an artist and need the money for living expenses.

Re: Selling our work

#17

I agree

Jim Shaver - Oakville, Ont

>That is right Ruth,

Your price also can dictate how busy you want to be and what is your bottom line, being "Famous" is nice if that is your goal, but if you need the income, Famous does not cook well at 350F or keep you fed, eh!

I price my work by what the common market asks, also because I use my income to support the Pens For Canadian Peacekeepers project and the odd tool purchase. We all find how we feel best, signing anything but flat work never appealed to me, LOL.

To each his/her own...

Take care,

Jim

Re: Selling our work

#18

That seems reasonable to me.

Brian Hahn in SW Wisconsin

>That price range is consistent with the prices I've seen for other production woodturners.