>I have a good friend who lives in Oregon, and he sent me a chunk of wood he calls Mountain Mahogany. I am led to believe it grows locally in his area. Its got a specific gravity of 1.25. Very dense, and cuts smooth as a baby's butt. Its a beautiful wood, almost pink within the light and dark browns. Does anyone know any more about this wood? I turned a small HF from it today, and really like turning this stuff. I'll try to get a pic up soon.
>Mountain Mahogany also grows here in Utah. And your description fits it pretty well. I've only cut and turned some small dead pieces and most of what I see while hiking is 6" or smaller diameter. I've always suspected that it's one of the drought resistant, very slow growing natives around here, but I remember reading somewhere a while back that the BLM was issueing permits to cut it somewhere in Nevada.
>In Colorado it grows mostly as low shrubs, I have seen it here in Nevada growing over twenty feet high. It usually grows inthe higher elevations. Deer love to feed off of it. I imagine the hard part is getting pieces large enough to turn.
>It is a western tree, and loves high and dry. I went down to Las Vegas last April because the Forrest service down there was thinning a bunch of it for fire safety. Apparently this is an ongoing process. The trees I got were at 8500 ft. by the Carlton Ski area. It gets about 4 inches of precipitation a year. In the lower elevations, the Juniper is the dominant species, but higher, and in more rocky soil, the MM is the dominant species. In hardness, on the Janka scale, sugar maple is about 8, bubinga is 12, lignum is 20, MM is 18. Mostly, it seldom gets above shrub size. Where we harvested, none of the trees were above 20 ft high (rather extreme growing conditions, deep fry in summer, and deep freeze in winter) and trees had 70 to 90 growth rings per inch. We got a few trees that were 18 inches in diameter, while most were in the 6 to 10 inch range. Wonderful wood, and the only green wood that I have turned that was at its greenest, and I needed to wear a dust mask. I do have some to trade.
>Mountain Mahogany (Cerocarpus) is a member of the Rose family and is a native shrub in many of the western states and east to the Rockies. Prefers dry slopes generally below 6000 ft. Also known as Hard Tack; Mountain Ironwood; Sweet Brush and Curly-Leaf Mountain Mahogany. It was on my property in No. Calif. and seemed to cluster itself around the Madrone. The wood is beautiful and IT IS HARD.
>Re mountain - Do any of you ever work with cedar ? I am plagued with cedar trees I know it is a bit off the subject but , I was just passing through, I wondered if any of you all ever come over to the East coast to buy wood . The cedar I am felling is good stuff .The bugs hate it, it stands up to time simaler to locust.it is wonderful for lining closets with . In fact we have been using it for support stringers in our barn because it doesn't get attacked like other wood dose by the carpenter Bees ,or wood boring insects and worms . It grows like crazy here in the Shenandoah mountains. If any of you ever get out this way . Do you have locust trees on the west Coast also ? I was born In Washington state but I can't remember what it was like. We moved before I was old enough to remember anything ? I am not a wood worker at all except to do simple repairs on our barn or cutting it up for fire wood . I own a small metal Fabricating & welding shop in Bedford ,VA. If your ever in the area come buy and viset with us. http://www.ornamentalironart.com
>I love MM but it is very hard to get big pieces. My experience with it is that it is very prone to checking. A long time ago they used to make rollerskate wheels out of it as it was so hard. But very easy to turn!