Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Combination Press Plough Plane

Noisy Belt Oneway 2435

Posts

Noisy Belt Oneway 2435

#1

Noisy Belt Oneway 2435

Dave Winters

>All of a sudden my belt is making a lot of noise. I sprayed it with some belt dressing I had around and that helped for about 10 minutes.

It looks fine but maybe not. I fiddled with the tension, tighter and looser, didn't seem to help....

Thanks-

Re: Noisy Belt Oneway 2435

#2

Re: Noisy Belt Oneway 2435

Don Evans

>One problem with serpentine belts is people tend to OVER tighten them.

Make sure it is running on all the ridges on both pulleys (top & motor) and no ridges are showing. It also should not be touching the side of one of the other pulleys or rubbing against it.

Make sure there is no trash in the ridges of the pulleys also.

Under tighten rather than over tighten it, is best. Serpentines don't slip very easy like the old V belt.

You should be able to push on side of belt and move it 1 inch at least just using one finger and slight pressure.

Don

Re: Noisy Belt Oneway 2435

#3

Re: Noisy Belt Oneway 2435

steve worcester

>Also, move the belt over from the pulley is is on and look for little pills of rubber in the pulley grooves. The other thing you may want to do is check the pulley alignment, the bottom pulley may have moved a bit.

Re: Noisy Belt Oneway 2435

#4

Re: Noisy Belt Oneway 2435

Wally Dickerman in Arizona

>I have had the motor pulley move on my Oneway. It should be about 1/4 inch from the motor.

Wally

Re: Noisy Belt Oneway 2435

#5

Keith Tompkins

Re: Noisy Belt Oneway 2435

keith tompkins

>Hi Dave, One thing I would not recommend is spraying belt dressing on your belt, it will just attract dust, and will actually cause the belt to deteriorate. The stuff is just a quick cure-all, not a solution.

Re: Noisy Belt Oneway 2435

#6

what happened to the other 1"?

Dick Coers

>I just have to ask. What happened to the last inch of your lathe. Most of us bought the 2436. Did you get a factory second that was only 35"?

HA,HA!