Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Abingdon, VA – Tree Cutting & Portable Sawmill

New Years resolution

Posts

New Years resolution

#1

New Years resolution

George in Minnesota

>My new years resolution for 2009 is to attempt to participate more in this forum rather than just listening in. So I guess I should make the first step by means of introduction. My name is George and I am a "transplanted Texan" that has been living in Bloomington, Minnesota for the last 3 years. My "day job" was the reason I moved north; this was my seventh relocation in my 34 year career with the various telecommunications companies that are now back to calling ourselves AT&T. This will probably be my last move until I retire in a few more years. My wife of 26 years and I have loved everything about living in Minnesota and you do get used to the cold (for the most part).

I started getting involved with woodworking 10 years ago and got "hooked" on woodturning about 5 years ago when I was visiting Mike Mastin @ Curly Woods and there was a club there making pens for soldiers. I haven't looked back since. I started with a Jet mini-Lathe and have just moved up to a mid-sized Oneway (1236SD). I bought that model because I have a very bad knee (4 surgeries) and envision that I will not be able to consistently stand in the future. My turning skill is between beginner & intermediate and spend most of myturning time when I can get it from that pesky day job making small gifts (pens, wine stoppers, small urns) for family and friends. Here are some of the ones I made recently (the ones on the left are laminations I put together). I am still not that great at sharpening and I hardly use the skew chisel. My other resolution is to get better at both. Comments on the stoppers and dialogue is welcome.

Ellis, thanks for putting together such a wonderful forum.

George


img

Re: New Years resolution

#2

I swear George...

Dave Peebles Lyons, Ohio!

>I had a long and fairly witty reponse to your post just about finished when my cat laid down on my mouse.. and it just vanished!! I hate when that happens :)

But I just wanted to give you a warm welcome and tell you that I really like what you are doing with your work.

Best wishes,

Dave

Re: New Years resolution

#3

My dog sits on the CAPS KEY

john lucas

>Welcome George, Glad to have you with us. I'm sure you'll have plenty to share.

Re: New Years resolution

#4

Re: New Years resolution

Norm Smith

>Hi George,

Welcome to the group. Nice job on the stoppers.

Norm

Re: New Years resolution

#5

Re: New Years resolution

Cyril Griesbach

>Welcome, George, and those are nice stoppers. Looking forward to your participation.

Re: New Years resolution

#6

Re: New Years resolution

DaveG

>Oh George I am in Dallas and today is suppose to get into the 70s. I am afraid if I was moved north my body might just shut down for the winter.

Re: New Years resolution

#7

Re: New Years resolution

Chip in Plano

>Nice stoppers and a good resolution. I knew Mike, too. I still have wood from Curly Woods that I haven't turned.

Re: New Years resolution

#8

Re: New Years resolution

Donna Banfield

>Hi George and welcome to the addiction of woodturning.

You are one of the first turners who I've heard bought the new Oneway 1236 SD (sit down) lathe. I currently have a Oneway 2436, and plan to add another Oneway when my new barn/studio is finished. I had planned on that being a 1224, but when Oneway introduced the 1236SD, I am rethinking my plans. I am 50 yers old, and have been plagued since a teenager with knee and hip problems. I've already lived through 4 surgeries so far, and expect to have a few more before I put down a turning tool for the last time ;^)

So, how do you like the lathe? Does it really work as well sitting down, or do you have to 'change' your muscle memory somewhat. I'm sure that there are a few of us who would be interested in your thoughts about the lathe.

So how's that for an opening for you to make good on one of your New Year's resolutions?

Re: New Years resolution

#9

Ellis Walentine

The thanks belong to you

Ellis Walentine

>I'm glad you've come out of the lurkers closet, George. Not that it is a crime or unusual or anything. I once calculated that there were over 50 lurkers for every poster here, proof that a lot of people are content to just read the forums whether or not they feel inclined to participate. I think that some feel a little insecure about asking questions or venturing advice here; but, in a conducive atmosphere like we try to cultivate here, no question is ever stupid and all advice and respectful opinions are welcome. If you are on the wrong track about something, the group will usually help clear things up for you. That alone is a reason to participate.

I hope you continue to find all the inspiration and advice you need to further your turning ambitions. And, just think, when you retire you can devote all that extra time in the shop. I'm hoping I can retire someday, too, but I don't hear any fat ladies warming up yet. OTOH, I wouldn't know what to do with free time. :-)

Cheers,

Ellis

Re: New Years resolution

#10

Re: New Years resolution

George in Minnesota

>I will remember that in July when we are hitting highs in the mid-70's 8-)

Thanks for all the welcomes.

Re: New Years resolution

#11

Re: The thanks belong to you

George in Minnesota

>Between my hobby (passion) and hers (horses), I better keep working for awhile. I made a promise to SWMBO when we moved that she would be able to board her horse at a facility that has a heated barn & arena. I do suffer the "tool junkie" affliction.

George

Re: New Years resolution

#12

Re: New Years resolution

George in Minnesota

>I haven't used it a lot in the "sitting" position since I am a "part-time" turner, but here goes:

- The unit is a 1224 with the tilting mechanism

- It comes with two completely separate tool rest/banjo systems; the one you would typically get with the 1224, plus the one in the 1236 picture when the lathe is pivoted.

- Since the whole bed pivots, certain operations are easier while others aren't - hollowing is more comfortable since you do not have to lean over the bed. I haven't tried hollowing a bowl yet but if you do it from the outside towards the center, the bed will probably get in the way of your initial tool placement.

- For smaller craft related items (pens, wine stoppers, etc...) the sit down position works fine; with an old office chair on casters, you can still do the woodturner's dance. 8-)

I was very happy with service from Oneway which I don't believe is any surprise; everything worked right out of the crate. Let me know if you have additional questions.

George

Re: New Years resolution

#13

Re: New Years resolution

Donna Banfield

>Thanks George. Your input is appreciated and very welcome.

As you spend more time turning on the lathe, for example, turning some bowls or other stuff, please post follow-ups as you turn/experience new things on the lathe.