Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Want Better Milling & Firewood Knowledge?

Carving tools

Posts

Carving tools

#1

Carving tools

john lucas

>If you want to try carving I suggest 2 things. This set of tools you can buy at your hardware store are pretty decent and fairly inexpensive. You can buy similar tools at Woodcraft. Then get a Dremel and buy a few good shaping tools like Typhoon bits. I have done a huge amount of carving with these over the years. The only other thing I suggest is a better quality sharpening stone and a strop to keep the General tools sharp.

I have other carving tools including flex shaft machines and high quality hand carving tools but I still reach for the two above most often. I'm just comfortable using them I guess.


img

Re: Carving tools

#2

Steven Antonucci

Concur- I have a similar set

Steve Antonucci

>Another great way to start carving is to buy Flexcut knives and make your own handles. I borrowed a set from my buddy and I love them, but I didn't need every thing in the set for $150. I went to Woodcraft and they had some of the individual tools with no handles on sale for $7 ea.

I turned a handle, drilled a round hole, and stuck the bit in, and it was ready to cut. Never even made the cut dowel to fill in the gaps.

Steve

Re: Carving tools

#3

Re: Carving tools

arkie

>Of all the carving tools I own, the little Harmen sets get the most use. I think they private label tools for just about everybody, including the ones pictured.

You ought to try sharpening them witth a set of paper wheels some time - faster and easier than by hand!

Re: Carving tools

#4

5 different ways to cut myself.....

Michael Stafford

>I have a set of those tools and used them to do some carving on my flatwork boxes a while back. I have them put away and need to bring them out and do a little experimentation.

Of course, I will be using my kevlar and chainmail gloves....;-)

I really have both.

Re: Carving tools

#5

Agreed..

Karen

>I have the same set and have been using them for nearly 20 yrs and use them more than the next size up which is a sturdier set. These little carvers and a couple home-made things are always within reach.