Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Personalized Wooden Watches, Engraved Free

new clock

Posts

new clock

#1

new clock

john lucas

>Here is a clock I just finished. It is a split turning. The base was turned seperate and one side cut off on the table saw. Then the edges were routed. The pendulum was a segmented ring cut by hand on a homemade miter jig. The pendulum arm was routed in. The words "True beauty cannot be touched by the passing of time" were burned in.

I don't have the other half of the split turning done yet. It has much simpler inlay's. The idea for this project was to come up a project that I could turn 2 at a time.

The clock is Walnut, the pendulum is ebony with the segments mahagony and basswood.


img