Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Veritas - Innovation in Tools

12" Jet banjo

Posts

12" Jet banjo

#1

12" Jet banjo

Jim in WI.

>I have a 1220 that I would like to make some better, beefier tool rests for (Robust style). I think the weak point would be the 5/8" post. Does anyone know the size of the 1236 post? Would the banjo from the 1236 fit the 1220? If so, where could I purchase just the banjo? Any other ideas would be appreciated.

Thank you.

Re: 12" Jet banjo

#2

Re: 12" Jet banjo

john lucas

>I would just make the tool rest out of steel. The reason the tool rests break is they are cast. I've made several from steel for myself and others and as far as I know none have brocken. Of course bigger would be better and a 1236 banjo could probably be modifed to fit the 1220.

Re: 12" Jet banjo

#3

Re: 12" Jet banjo

GalenV

>I have only had my Jet 1220 for a year but I am not sure if it is just turners with larger lathes that feel the 5/8 tool post is weak.

Being new I have had some MAJOR catches that jammed the post down to the banjo or rotated the tool rest till it caught on the green bowl blank I was turning. Probably a good catch on hollowing a box and was out at the outer end of the tool rest till it took the piece out of the chuck. Hey I said I'm learning!

I figure with my lack of experience I should have busted something by now if it was a weak point.

There are turners that have epoxied a hardened drill rod to the top edge of the rest and I may try that, but for now it is easy to run a mill file on the top edge to clean up nicks. Better to nick the rest than the lathe tool edges I think.

Just from a new turners point of view.

Wish for 2009 to do a better job at turning anything but to also have fun!

Re: 12" Jet banjo

#4

Re: 12" Jet banjo

Philip Morris

>Jim,

I had a 1236 and now have a 1220. The tool rest post on the 1236 is 1" dia. You can get a base from Jet (you can go to thier website and find the manual for the 1236, locate the part number, then go to their parts locator link).

You should note that the clamping mechanism operates differently, so you may have to buy more than just the base casting. BTW, I find that the 1220 base is easier to lock down and seems more secure.

If you really want something solid, you can buy a tool rest base from Oneway. They are proud of them, but they are really nice.

Re: 12" Jet banjo

#5

Re: 12" Jet banjo

JohnKyler

>If it aint broke, dont fix it.

When it breaks, fix it.

JMHO

John

Re: 12" Jet banjo

#6

Re: 12" Jet banjo

Eric Knutsen

>I was told the Jet Banjo isn't the best, so when I acquired a used 1236 I bought a Delta from Amazon.com They had the best price around.