Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This $39 jig will make you a WOODWORKING GOD!

Prismacolor users.......

Posts

Prismacolor users.......

#1

Prismacolor users.......

Chip in Plano

>What are some tips for using prismacolors on wood? Do you apply a finish first? If so what? How well does a color blender pen work?

I have some light wood (bradford pear?) that I thought about bleaching to a whitewood then coloring with pens. Anybody tried this?

This is new territory for me for 2009.

Re: Prismacolor users.......

#2

A note of caution...

Brian Hahn in SW Wisconsin

>The standard Prismacolor markers are not lightfast. A few colors hold up pretty well, but most of them fade to nothing after a week or two of sunlight.

A better alternative is to use lightfast artist inks (Higgin's Fadeless is one brand), or artist grade watercolors, or artist grade airbrush paints, or thinned artist acrylic paints. All of these are high quality and lightfast colors, but do have a higher learning curve.

Re: Prismacolor users.......

#3

Re: A note of caution...

Chip in Plano

>Excellent comment. I do intend to build the top finish using a UV-protectant product. I think the one I need to get is a special Krylon version that Andi Wolfe mentioned on another forum. And if the eventual owners of any of the pieces in this series puts them in full sunlight....well, I'm glad they paid cash.

Airbrushing is on my list of to-do's. I'm only allowed to have so much fun at a time.

Re: Prismacolor users.......

#4

An easier option.

Brian Hahn in SW Wisconsin

>There are easier (and cheaper) ways to apply color. Watercolor brushes do a very good job at a fraction of the cost of an airbrush, plus you probably already know how to use them. They also are a lot easier to use.

I have an airbrush, but I use watercolor brushes most of the time. I usually only use the airbrush when I'm trying to cover a large area or I want the color to fade to nothing.

Re: Prismacolor users.......

#5

finish over color?

John K Jordan

>Brian,

I've had terrible experiences with applying finish over color applied with various markers, including Sharpies. I prefer shellac-based friction for small things like finger tops, but it makes the colors bleed.

What finish works well with what type of paint or ink? Would it help to spray a thin coat of something clear first?

JKJ

Re: Prismacolor users.......

#6

Re: finish over color?

Brian Hahn in SW Wisconsin

>The problem with markers like Sharpie and Prismacolor is that the colors are soluble in most solvents. I seal the colors first with a light spray coat of Krylon Fixatif. The Fixatif won't make the colors bleed. Then it is safe to use the finish of your choice. I usually use a spray can of lacquer (Deft) or clear acrylic (Krylon), but I've successfully used a number of other spray finishes.

Inks and watercolors don't have a water-proof binder and need to be sealed with a light spray coat of a solvent-based finish like lacquer. I used a water-based sanding sealer once and that added some "interesting features" to the design.

Airbrush and artist acrylic colors are pigments dispersed in an acrylic medium. Once dry, they can be top coated with anything.

Re: Prismacolor users.......

#7

Re: finish over color?

John K Jordan

>Thanks, I'll try that. I've got fixatif on the shelf.

JKJ