Visit to John K Jordan's Place
jake Niedling
>Spent about 4 hours at John K. Jordans place yesterday and had a great time. John showed me around his 37 acre farm, his saw mill and of course his shop. He has a beautiful place with a great view and a few animals to keep him busy every day for a couple of hours. ( horses, sheep, goats, chickens and dogs). In the shop filled with many large containers of wood ( all labeled ) ready for turning projects. We talked about wood, turning tools and turning. John showed me how he turns his majic wands using the skew. He starts these by turning a morse taper on one end of the wood blank to fit his head stock (between centers of course). Then remounts the blank into the head stock morse taper (this is the large handle end of the wand). This really provides alott of support for the one end to reduce the flexing of the piece as it is turned down to a thin spindle on the one end. The opposite end still wants to flex when you get it down in diameter. So John used his skew with long planing cuts to reduce it down to final diameter. He has to support the wood with his opposite hand behind the cut.
John was very generous and gave me a couple of boxes of different woods to play with. He also gave me a wand blank out of wormy chestnut, so I could try making a wand. I will post it in a couple of days.
Thanks John for allowing me to come over and spend some time with you. I really enjoyed it.
Jake



