Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Domestic, Figured & Live Edge Hardwoods in Stock. Best Prices for Serious Woodworkers.

patriot chuck

Posts

patriot chuck

#1

patriot chuck

joaz

>Hi Folks, I have not been here for a while but know where to go when I need information. I got a gift certificate from the wife to Packard woodworks for Xmas.

I am looking at the Patriot Chuck and was wondering what reviews you folks might have. I'm a Oneway Stronghold guy from way back and will probably go with the Stronghold body if the Patriot gets bad reviews.

Let me know what you think and thanks in advance.

Check out my web site for new work.

www.maine-web.com/woodturning

Joaz

Re: patriot chuck

#2

JL

Re: patriot chuck

JL

>I do not have a Patriot chuck, I have a Stronghold. My friend Mike has a Patriot chuck. I have turned on his Patriot. If I hadn't of already had a Stronghold, I would definitely consider the Patriot. I really liked the hex key as opposed to the Talon's and the Stronghold's toothed key. I also liked their T-handle as opposed to the Stronghold's sliding bar. The Patriot is lighter than the Stronghold. I guess it compares more to the Talon.

Re: patriot chuck

#3

Neighbah...

Jorge Castaneda ~ Downeast Maine

>Hope you guys had a good Christmas.

I don't have the Patriot, but I do have a Supernova 2, a Vicmarc 100 and the Stronghold is my recent acquisition and wish I got it a few years ago. I would go with another body or with different sets of jaws. I got #2 Tower jaws besides #1 and #2 and I like them a lot.

$0.03 adjusting for inflation

Jorge

Re: patriot chuck

#4

i like talon

robert davis

>i have stronghold ,talon, super nova..use talon most.stronghold is great if you do BIG stuff. can use nova jaws on talon. i have every nova jaw..

Re: patriot chuck

#5

Re: patriot chuck *LINK*

John Peck

>You can find detailed information about the Sorby Patriot chuck at Sorby's web site and at the link below to the Tool Post, a UK seller of woodturning tools. According to the description, the Patriot chuck can use all of the Nova chuck jaws.


Patriot Chuck

Re: patriot chuck

#6

Re: patriot chuck

Walta

>Is the Patriot chuck a rebranded Super Nova 2?

Walt

Re: patriot chuck

#7

Re: patriot chuck

John Jordan

>I used a Patriot chuck for several weeks in the UK earlier this year. I never even thought about what I was using until near the end of the trip and I did a show where Sorby paid my way. I thought that if it worked well enough to ignore, it was pretty good. I went to the plant ( the second time I've been there) and found out that I had been doing this big woodworking show with the guy that puts the chucks together. One man does all the chucks.

Almost all of their employees are woodturners and go out and demo and are involved in their products. (kind of like here at JJ Woodturning LOL).

A long way to say it's a very nice chuck. It is a bit smaller than a Stronghold, and it's most definitely NOT a Nova chuck.

John

Re: patriot chuck

#8

Re: patriot chuck

Ken Ward

>I was lookin for it at packard,but couldn't find it

Re: patriot chuck

#9

Bill Blasic

Re: patriot chuck

Bill Blasic

>John,

Just wondering did they say where the parts come from that the guy puts together to make the chucks? Curious minds and all!

Re: patriot chuck

#10

Re: i like talon

Eric Knutsen

>Nova jaws are compatible with the Talon?

Re: patriot chuck

#11

Re: i like talon

Bill Howatt

>I don't use Nova jaws on mine but it has been posted many times that they are and also on the original Oneway which uses tommy-bars. Stronghold jaws are different though.

Bill

Re: patriot chuck

#12

Re: patriot chuck *LINK*

John Peck

>From a thread at UK Workshop forum about place of manufacture of Patriot chuck:

Dear **********

Thank you for your email regarding country of manufacture.

This subject is something that Robert Sorby feel very strongly about and is a big reason why we are no longer the agent for the chuck and lathe supplier we had dealt with in the past as all of their manufacturing has now moved to China.

We at Robert Sorby are extremely proud to be a British manufacturer and we want to maintain the enviable reputation that the company has had for hundreds of years.

The Patriot chuck is manufactured right here in Sheffield and you can rest assured that the engineering quality is as high as you would expect from any Robert Sorby product together with an unrivalled guarantee of service and commitment from all Robert Sorby staff.

I hope this has answered your question and I thank you for your support of British manufacturing.

Best regards

***********

Product Manager

Robert Sorby

Sheffield

England


UK Workshop Forum re Patriot Chuck

Re: patriot chuck

#13

Re: patriot chuck

joaz

>Thanks all for the great feedback. If the Talon will take Nova jaws, I think that is the way I will go since I have a couple of the old Nova chucks around.

Thanks again! Joaz

www.maine-web.com/woodturning

Re: patriot chuck

#14

Re: patriot chuck

Jorge Castaneda ~ Downeast Maine

>Joaz,

Reading the link above, looks sounds like the Patriot takes nova jaws too...