Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

If you sell to woodworkers, your customers are already here

How to Finish Over Waterlox, Help Please

Posts

How to Finish Over Waterlox, Help Please

#1

How to Finish Over Waterlox, Help Please

Jim Shaver - Oakville, Ont

>Hi,

I finished a project yesterday using some Waterlox that I found in my shop, I read a lot about it and had the container for 3-4 years waiting for yesterday.

SO how do you finish over Waterlox, I'm thinking a simple Beall buffing...No???

thanks,

Take care,

Jim

Re: How to Finish Over Waterlox, Help Please

#2

Re: How to Finish Over Waterlox, Help Please

Brian Hahn in SW Wisconsin

>Buffing is popular and works, but sometimes I don't bother.

Waterlox is a wiping varnish and as such it really doesn't need anything on top.

Re: How to Finish Over Waterlox, Help Please

#3

Re: How to Finish Over Waterlox, Help Please

Jim Shaver - Oakville, Ont

>Thank You,

I applied one coat so far and it looks like a matt finish. I am now wondering how many do you normally put on, I am using them on peppermills, so maybe more than a few applications I might guess then??

Thanks,

Jim

Re: How to Finish Over Waterlox, Help Please

#4

Re: How to Finish Over Waterlox, Help Please

Russ Fairfield

>1 coat is just starting to get the grain filled. Put on 3 or 4 coats for a nice finish, but 10 or 12 will give you something to brag about.

Re: How to Finish Over Waterlox, Help Please

#5

Re: How to Finish Over Waterlox, Help Please

Chip in Plano

>When I use Waterlox, I typically use 3-5 coats. 3 for a matte finish which I knock down the glossy buildup with 0000 steel wool. 5 coats (or more) for a high-gloss. I do still use a Beall system. I probably don't need it on the matte finishes but that's what I do.

Re: How to Finish Over Waterlox, Help Please

#6

Keith Tompkins

Re: How to Finish Over Waterlox, Help Please

keith tompkins

>HI Jim, After the first coat is thoroughly dry, sand the surface with fine paper, perhaps 600 grit wet or dry. Then apply subsequent coats, repeating the same procedure. When you are satisfied with the finish, you can repeat the sanding, sand in stages down to 1200 grit,(or even finer) then buff if you desire a high gloss, or steel wool for a low gloss sheen. this will give you a smooth, flawless finish.

Another method is to wipe on the finish, then allow to sit for a minute or so, then wipe dry. Do this daily to build up the desired effect.

Re: How to Finish Over Waterlox, Help Please

#7

Re: How to Finish Over Waterlox, Help Please

Jim Shaver - Oakville, Ont

>Thanks Russ

Happy New Year,

Jim