Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Good Hope Hardwoods - Walnut Slabs & Specialty Hardwood Lumber

Comfort tool rest

Posts

Comfort tool rest

#1

Comfort tool rest

Paul Zerjay

>Are the comfort tool rests really as nice as what I have heard? I am looking to get a shorter rest for doing finials and small spindle type work. I want to be able to work close and not get all the dings and nicks from the corners of a skew. TIA

Re: Comfort tool rest

#2

Re: Comfort tool rest

don lewonczyk

>I have the 4"&6", I like them and the tools slide pretty much effortlessly. You should round over the corners of your skews on a belt sander the length or the shanks that will help as well. DonL

Re: Comfort tool rest

#3

Re: Comfort tool rest

bowlman

>I recently purchased the 6" tool rest and I am now considering both the 4" and 12". They are definitely superior toolrests. Yu won't be disappointed.

Re: Comfort tool rest

#4

Re: Comfort tool rest

Michael Stafford

>I just bought a Comfort tool rest for my lathe and have been using it for only a month. I find it to be very well made and it required minimal tuning as it had almost no rough spots that your hand would find uncomfortable as you work on the rest. It certainly allows one to have much closer access to the work. In fact I have been using it in reverse in some instances where I place the tool rest between the tailstock and the piece when it is supported by the live center. Nice piece of equipment!

Re: Comfort tool rest

#5

Re: Comfort tool rest

Greg Haugen

>I'd echo what everyone else is saying! I have a six inch and I've had it for 5-6 months now. I grumble to myself when I have to use my bigger cast iron rest that came with my Jet. I'll be getting a bigger comfort rest soon. Maybe I could use that hunk of cast iron that came with my lathe as a "boat anchor" or something. Comfort Rests are the best rests available, in my opinion.

*not employed by Robust in any way-just a happy customer."

Greg H.

Re: Comfort tool rest

#6

Yes!

Carole Valentine

>

Re: Comfort tool rest

#7

Re: Comfort tool rest

Michael Stafford

>Let's be careful how we speak about anchors my friend....;-)

Re: Comfort tool rest

#8

Re: Comfort tool rest

Gordon Seto

>Now they have the low profile version. I think that would be good for underhand grip using finger to support the thin finials.

I got mine from Bill Grumbine. I like them so much I added the 5/8" version for the mini lathe.

Re: Comfort tool rest

#9

Re: Comfort tool rest

Cyril Griesbach

>I might consider giving up my Select Comfort bed before I'd give up my Robust Comfort Tool Rest.

Re: Comfort tool rest

#10

I have three of them...

Brian Hahn in SW Wisconsin

>...Two for my big lathe (Robust) and one for my Jet mini. The only thing that will scratch the top of the tool rest is sand paper. A file skids on it, and a turning tool won't touch it.

Re: Comfort tool rest

#11

Re: Comfort tool rest

Carole Valentine

>I use mine in reverse a lot too, Mike.

Re: Comfort tool rest

#12

Re: My Stubby (Studly!) wears a 12".....

Jamie D

>.....Robust rest and he loves it!

Re: Comfort tool rest

#13

Re: Comfort tool rest

Bill Noce Northeast Ohio

>I have the 4" and 6" on my Jet Midi don't use my round bar one anymore. Made an adaptor(1") so I can use both on my Nova 3000....very comfortable rest.

Re: Comfort tool rest

#14

Re: My Stubby (Studly!) wears a 12".....

don lewonczyk

>Amend my first post a little, during the tax rebate I blew my $600 on turning stuff, the 4",6", 9" and 12", they were for the PM3520 but the beauty of it was that they also fit my Nova DVR 3000 so that was sweet. Three of Doug Thompsons gouges, two of Dave Peeples handles and the swing away tailstock for the PM from Don Butler and that done in my rebate and part of my wifes also. I still owe her a back rub which I've been reminded of lately, a promise is a promise. Merry Christmas again and a Happy New Year to all. DonL

Re: Comfort tool rest

#15

I'm calling Brent tomorrow

Paul Zerjay

>

Re: Comfort tool rest

#16

I called Brent...

Paul Zerjay

>and got a hold of a his wife (I guess). Nicest lady, very helpful and pleasant to deal with. My new rest will be on its way tomorrow. Thanks for all the replies. And thank you Robust