Awesome new toys
mfoster
>I have had the Hunter #1 for a while now, but only really tried it on one small hollow form. I got a Hunter # 5 about a month ago and it sat on a bench till tonight.
I have been working on a large segmented piece for a while now, and it is finally stacked and in the turning phase. This piece will be about 18" in diam. and almost as tall (open form). I like to stack the piece and keep the walls as thick as I can to help reduce vibration while turning such a piece (especially at the rim). When I was getting near to turning this piece, I realized that I would be reaching way over the tool rest and flex in the shaft of my Jamieson could become a problem. I wound up talking with Lyle, and he highly recommended his Jumbo bar. Well, I got this for Xmas (from a not so subtle hint to my wife).
I was a little reluctant to try learning with a new tool on a piece of this scale. I have used hook tools and the Termite, so I thought I'll go easy and give the Hunter's a try. I started the process with the #5 at the rim and worked in. Turning with the #5 was a dream. Nice clean cuts and almost no vibration (I have a large heavy duty bowl steady which helps as I can get the 3 wheels supporting the bowl almost to the rim). I switched over to the Hunter #1 in the Jumbo boring bar and found this combination to be just as nice as what I found with the #5. I quit tonight when I was reaching 10" into the vessel, and still felt that I was getting almost 0 flex/vibration from the Jumbo bar. I have 5 or 6" more of reach till I get to the bottom of the vessel, but expect no real problems.
I was duly impressed with all the above tools. Definitely worth getting them. The Hunter's are great tools, and have the potential to become a tool of choice for me (for hollowing). The Jumbo boring bar is something I should have done a long time ago. I have done other large pieces using the Jamieson system, but probably pushed the tool further than I really should have. Turning tonight was Sweeeet!
Mike



