Re: Need help purchasing Airstream AS400
Jim Sebring
>I don't have any experience with the newer Airstream products, but I have been using an Airmate 3 (pictured in Raffan's book "Turning Wood") since 1992. It has not had heavy use, but has served me well for a long time. I use it whenever I'm sanding at the lathe and when I turn dry wood. I'm very susceptible to dust, so have a Jet air cleaner hung from the 9 foot ceiling, and also run my Delta dust collector with 1 micron bags while making dust.
I've replaced the face shield on the Airmate 3 once or twice. The Tyvek chin skirts get dirty so needs to be replaced once in a while. The overlays are very worthwhile. They keep most of the face shield from getting scratched.
I've only replaced the filter a couple of times. I use the shop vac to clean it whenever I feel like it. Since the belt unit is behind me when I'm turning, it doesn't get a lot of dust directly on it. My helmet came with a cup-shaped air flow testing device. In use, it's placed in the end of the hose and the fan is turned on. If the cup floats up to a scribed mark, the air flow is fine.
I had the original 1992-vintage NiCad battery pack rebuilt at Batteries Plus a couple of months ago because it wouldn't run long between charges. The run time on these batteries is exceptionally long - upwards of 6 hours.
I have the following spares on hand: filter, battery, overlays, Tyvek skirt. I bought the spare battery in 2005 just because the original was pretty old. At $100-125 new, I've decided to have the packs rebuilt in the future. It cost me $32.19 to have the old pack rebuilt!
Sorry for the long winded response, but my experience should give you a good look at what you might expect from your new 'air hat'.
Merry Christmas.