I got a McNaughton coring tool!
Steve Antonucci
>I knew I would, since I sent the link to my wife and signed for the package but now I actually have it in my posession!
So, what did you get?
Steve
Knowledge You Can Build On — Est. 1998
I got a McNaughton coring tool!
Steve Antonucci
>I knew I would, since I sent the link to my wife and signed for the package but now I actually have it in my posession!
So, what did you get?
Steve
Re: I got a McNaughton coring tool!
Steven Kubien
>Nothing shop-related but I got a great cookbook, "Cook with Jamie" by Jamie Oliver. I love his approach and everything of his I have tried has turned out great. Related to that, I finally got a big mortar and pestle for use in the kitchen. Things gotta weigh 5 lbs. Lovin' it!
Steve Kubien
Got my first Thompson tool
Brian Hahn in SW Wisconsin
>My sister and her husband gave me a Thompson spindle gouge. Their question was: Is that piece of steel really worth that much money?
Now I need to shake a nasty head and chest cold so I can get out to the shop and use it!
Amendment...
Steven Kubien
>...I also got a nice long nap in the middle of the afternoon which I just woke from. Sweet.......
Re: Got my first Thompson tool
Ken Ward
>Got me the holfast vac system,and the ridged cordless drill set,large drill,small drill and flashlight,course I new I was getting the vac chuck system when I saw it on sale and just happened to mention it to LOML,just couldn't open it till santt day.
Re: Got my first Thompson tool
KTK
>My dad offered to buy four (count 'em 4!) Thompson tools for x-mas and b-day presents. I'm thinking bowl gouges and a spindle gouge. Thing is I don't know enough about the differences between the v- and u-shapes. Any suggestions?
Re: I got a McNaughton coring tool!
George in Minnesota
>I got insulation & heater for the garage/workshop. Not glamorous, but I got it early, and have enjoyed the warmth immensely since Thanksgiving.
Oh yeah, I also got pajama bottoms with the "Pillsbury Doughboy" on them (LOML has a wonderful sense of humor).
I hope everyone had a wonderful Christmas.
George
Re: I got a McNaughton coring tool!
Dick Hines
>I got a house full of company and could not wait for them to leave.
I have therr more days and I will be clear for the year. Whif's birthday on the 30th, we were married on the 31th , New Years is Jan 1 and my brithady is Jan 3. If I can make it until Jan 4 I will have clear sailing for the rest of the year.
Took the family to Costa Rica
Steve in NC
>Changed this up a bit this year and took a family vacation for the holidays. It is amazing how much more relaxed things were. Today is the first day in a week we even had internet service and we did not even bring a cell phone.
Spent four days at an Eco Lodge in the rain forest then travled to a resort in the north region near Arenal. For Christmas day we went white water rafting followed by a vist to the thermal spas. Not a bad way to spend a day.
Hope you all have a great and relaxing holiday.
Steve
Re: I got two feet of snow
Ed Larson
>I got two feet of beautiful snow. Will do some turning tomorrow. Happy Holidays to all at WC.
Re: I got two feet of snow
Jim Sebring
>Looks like my place here nw of Seattle. Unfortunately, those Costo 'truck tents' don't hold up very well under a lot of snow. The one that was sheltering all the turning stock I gathered last summer crashed in a big heap this morning. Good thing the wood is all Anchorsealed ;-)
And, oh, I got a SuperNova 2 chuck from the LOML!
I like the U's on the bottom of bowl
Steve Antonucci
>I think the "fit better on the inside" than the V's. The V is my go-to turning tool for almost everything else...
Steve
Re: I got a McNaughton coring tool!
Texian
>Hang in there Dick. Some of us can relate.
Re: I got two feet of snow
Texian
>Great looking snow Ed. Thanks for the picture.
Re: I like the U's on the bottom of bowl
Doug Thompson near Cleveland
>I personally like the V shape tools. I you have any questions call me after 12 noon 440-241-6360
Doug
Re: I got a McNaughton coring tool!
don lewonczyk
>I got a new(5 year old) Ingersal-Rand 2 stage air compressor with an air dryer unit for $950.00. The guy never used it and didn't have room for it anymore. I replaced the broken gage, put oil in for the first time, rotate the pully by hand to make sure it wasn't frozen, wired it up, plugged it in and it worked perfect. Found it on Craigs list near Nashville, TN. Take Care, DonL
Re: Got my first Thompson tool
Bill Blasic
>Karl,
My preference is the V tools but I'm absolutely sure you will love which ever ones you get.
Re: I got my power back on..
Donna Banfield
>after almost 10 days without it. Almost had a Flintstone's Christmas.
Oh yeah, also got a weather-tight shell on the barn, and a 200 amp panel installed and ready to hook up. Ironically the electrician was doing the installation during the power outage. Now it might be a few weeks before the power company will get around to hooking me up with power from the road -- they're pretty busy restoring all the downed lines from the ice storm two weeks ago here in New England.
Still a good Christmas!
Re: I got a McNaughton coring tool!
Don at Central Illinois
>My daughters birthday is the 30th, son in law the 31st and Mom's in Jan 1st. Then I have a few months to save up for grandkids. And lovin' every minute of it.
Nice !
Don Orr
>Good for you Steve. Hope you enjoy it a lot.
Re: Got my first Thompson tool
Dennis Yoder
>Call Doug and listen to his expert advice. He will not lead to astray. Have several of Doug's tools. Dennis Y
Re: Got my first Thompson tool
John Scheideman
>I bought the V gouges from Doug and like them very much. You will love your purchase. Doug is great to work with and makes one of the best gouges available.
John